Trim and Refine: A Step-by-Step Guide to Cropping Videos in Avidemux

How to Crop a Video with Avidemux

Ollie Mattison

Mar 27, 2024• Proven solutions

Cropping a video, to bring focus onto the important aspects and remove the extraneous parts of the scene, is one of the most valuable tools available to a video editor. It can be used as mentioned to ensure the viewer focuses on what is important, but also to magnify objects on the screen, such as with footage of nature. It has many uses, and one of the best tools available for cropping video is the free program Avidemux. Here we are going to go through the process of getting Avidemux running on your system and cropping some video.

---

If Avidemux is too complicate for you, you can consider Wondershare Filmora , which is an easy-to-use video editing tool to crop videos within several click. Download the free trial version blow.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Crop a Video with Avidemux

1. Installation

You can find Avidemux for download here , it is available for a wide range of platforms, just download the version that fits your needs. Once downloaded, install in the standard way for your platform, this is the Wndows version (64bit).

One point of note during installation is that you can choose which parts of the program you wish to install. It is a very small footprint and for the best performance it is wise to simply install everything.

Once installed you will be presented with the program as seen here.

2. Importing Video

The next step is importing video. This can be done in two ways, by clicking the file folder icon at the top left you open a standard file browser to navigate to, and select your chosen video file, or alternatively you can simply drag you video into the main panel to import it.

Whichever route you take, you will end up with your video file loaded in like this.

Now you can edit the video as you need, Avidemux contains a wealth of features to enable the full spectrum of editing tasks to be completed. However, here we are going to look at the cropping tool, so on to the next step.

3. Editing Video

Avidemux has some idiosyncrasies in terms of operation, one of those is that to be able to edit any video, you have to choose your output format. Don’t worry though, this is easy, just use the dropdown at the side to choose the output format you want as can be seen here.

Once that is set you are free to start editing your footage.

4. Cropping

It is important to understand how the editing process works in Avidemux, everything is accessed via the filters menu Video>Filters and from here you are faced with a new interface that enables you to choose the component you wish to use.

Selecting ‘Crop’ from the menu and pressing the green plus symbol at the bottom activated the crop tool and presents you with yet another view that allows you to adjust the crop to your tastes.

5. Cropping controls

There are two options for cropping, you can use the Auto crop feature, which will detect any black lines and crop the footage between them, or if you are using the crop tool for something else, or just want to do it manually, you can set the crop via the left right top and bottom boxes. Values input here are the number of pixels from that edge the crop extends, as you are setting it, this is displayed with a green block signifying the area of the image that will be removed.

You can adjust this independently for all 4 edges as you wish.

Once you are happy with the crop, you click Ok and it takes you back to the familiar filter menu where you can use other components to perform more editing if you need.

6. Saving the crop

One of the most common points of confusion with Avidemux comes at this point, as your video will look no different to when you started, and many think they have done something wrong, but this is another part of Avidemux workflow. These filters can only be applied when the video is reencoded, and you do that through the file>save menu.

Selecting this presents the familiar export dialogue and allows you to choose the name and destination of the file. Once that is done you click OK and you will see Avidemux processing your file and re-rendering it in this dialogue box.

How long it takes will depend on a few factors, how many other effects have been added, how fast a processor your computer has, and how large and what resolution the video is. Format also plays a part in the process too, with some formats taking less time to encode than others. Once it has finished, you can view your video and see the crop in action.

As we can see, although there are a few aspects of the workflow that are a little unintuitive, cropping video in Avidemux is a straightforward process that anyone can accomplish with a bit of patience.

One of the key things to remember with Avidemux is that you apply all of your filters before re-encoding, this again is a question of patience and a bit of organization to ensure everything you wish to do is completed in order.

Avidemux is a great piece of software, it lacks the polish of some of its commercial rivals of course, but behind the sometimes clunky interface there is a very broad range of features that allow you to accomplish more or less any editing task you may want. In terms of free programs this is about as good as it gets, and the output is, without a doubt, great quality. For anyone looking for a free solution to video editing problems, and who do not mind a learning process Avidemux provides a useful tool.

An Easier Way to Crop a Video with Filmora

Filmora Video Editor is a powerful program that allows you to create stunning video clips in only a few clicks. This video editing software provides users with a variety of tools for editing videos. It also includes a user-friendly interface for editing home films on Windows PCs, Macs, and Linux devices. To crop a video, these are to follow:

Step 1: Open a video that you want to edit. Go to “Import” and choose the file that you want to upload and put it in the Media Library.

Step 2: Select the “Crop and Zoom” icon in the Filmora editing tool.

Step 3: To alter the size of the crop frame, drag the pointer from any corner of your video preview window.

Step 4: When you’ve changed it to your liking, click the green “OK” button. As a result, you may effortlessly add or remove any element of a video clip on Filmora.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Cropping a video, to bring focus onto the important aspects and remove the extraneous parts of the scene, is one of the most valuable tools available to a video editor. It can be used as mentioned to ensure the viewer focuses on what is important, but also to magnify objects on the screen, such as with footage of nature. It has many uses, and one of the best tools available for cropping video is the free program Avidemux. Here we are going to go through the process of getting Avidemux running on your system and cropping some video.

---

If Avidemux is too complicate for you, you can consider Wondershare Filmora , which is an easy-to-use video editing tool to crop videos within several click. Download the free trial version blow.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Crop a Video with Avidemux

1. Installation

You can find Avidemux for download here , it is available for a wide range of platforms, just download the version that fits your needs. Once downloaded, install in the standard way for your platform, this is the Wndows version (64bit).

One point of note during installation is that you can choose which parts of the program you wish to install. It is a very small footprint and for the best performance it is wise to simply install everything.

Once installed you will be presented with the program as seen here.

2. Importing Video

The next step is importing video. This can be done in two ways, by clicking the file folder icon at the top left you open a standard file browser to navigate to, and select your chosen video file, or alternatively you can simply drag you video into the main panel to import it.

Whichever route you take, you will end up with your video file loaded in like this.

Now you can edit the video as you need, Avidemux contains a wealth of features to enable the full spectrum of editing tasks to be completed. However, here we are going to look at the cropping tool, so on to the next step.

3. Editing Video

Avidemux has some idiosyncrasies in terms of operation, one of those is that to be able to edit any video, you have to choose your output format. Don’t worry though, this is easy, just use the dropdown at the side to choose the output format you want as can be seen here.

Once that is set you are free to start editing your footage.

4. Cropping

It is important to understand how the editing process works in Avidemux, everything is accessed via the filters menu Video>Filters and from here you are faced with a new interface that enables you to choose the component you wish to use.

Selecting ‘Crop’ from the menu and pressing the green plus symbol at the bottom activated the crop tool and presents you with yet another view that allows you to adjust the crop to your tastes.

5. Cropping controls

There are two options for cropping, you can use the Auto crop feature, which will detect any black lines and crop the footage between them, or if you are using the crop tool for something else, or just want to do it manually, you can set the crop via the left right top and bottom boxes. Values input here are the number of pixels from that edge the crop extends, as you are setting it, this is displayed with a green block signifying the area of the image that will be removed.

You can adjust this independently for all 4 edges as you wish.

Once you are happy with the crop, you click Ok and it takes you back to the familiar filter menu where you can use other components to perform more editing if you need.

6. Saving the crop

One of the most common points of confusion with Avidemux comes at this point, as your video will look no different to when you started, and many think they have done something wrong, but this is another part of Avidemux workflow. These filters can only be applied when the video is reencoded, and you do that through the file>save menu.

Selecting this presents the familiar export dialogue and allows you to choose the name and destination of the file. Once that is done you click OK and you will see Avidemux processing your file and re-rendering it in this dialogue box.

How long it takes will depend on a few factors, how many other effects have been added, how fast a processor your computer has, and how large and what resolution the video is. Format also plays a part in the process too, with some formats taking less time to encode than others. Once it has finished, you can view your video and see the crop in action.

As we can see, although there are a few aspects of the workflow that are a little unintuitive, cropping video in Avidemux is a straightforward process that anyone can accomplish with a bit of patience.

One of the key things to remember with Avidemux is that you apply all of your filters before re-encoding, this again is a question of patience and a bit of organization to ensure everything you wish to do is completed in order.

Avidemux is a great piece of software, it lacks the polish of some of its commercial rivals of course, but behind the sometimes clunky interface there is a very broad range of features that allow you to accomplish more or less any editing task you may want. In terms of free programs this is about as good as it gets, and the output is, without a doubt, great quality. For anyone looking for a free solution to video editing problems, and who do not mind a learning process Avidemux provides a useful tool.

An Easier Way to Crop a Video with Filmora

Filmora Video Editor is a powerful program that allows you to create stunning video clips in only a few clicks. This video editing software provides users with a variety of tools for editing videos. It also includes a user-friendly interface for editing home films on Windows PCs, Macs, and Linux devices. To crop a video, these are to follow:

Step 1: Open a video that you want to edit. Go to “Import” and choose the file that you want to upload and put it in the Media Library.

Step 2: Select the “Crop and Zoom” icon in the Filmora editing tool.

Step 3: To alter the size of the crop frame, drag the pointer from any corner of your video preview window.

Step 4: When you’ve changed it to your liking, click the green “OK” button. As a result, you may effortlessly add or remove any element of a video clip on Filmora.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Cropping a video, to bring focus onto the important aspects and remove the extraneous parts of the scene, is one of the most valuable tools available to a video editor. It can be used as mentioned to ensure the viewer focuses on what is important, but also to magnify objects on the screen, such as with footage of nature. It has many uses, and one of the best tools available for cropping video is the free program Avidemux. Here we are going to go through the process of getting Avidemux running on your system and cropping some video.

---

If Avidemux is too complicate for you, you can consider Wondershare Filmora , which is an easy-to-use video editing tool to crop videos within several click. Download the free trial version blow.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Crop a Video with Avidemux

1. Installation

You can find Avidemux for download here , it is available for a wide range of platforms, just download the version that fits your needs. Once downloaded, install in the standard way for your platform, this is the Wndows version (64bit).

One point of note during installation is that you can choose which parts of the program you wish to install. It is a very small footprint and for the best performance it is wise to simply install everything.

Once installed you will be presented with the program as seen here.

2. Importing Video

The next step is importing video. This can be done in two ways, by clicking the file folder icon at the top left you open a standard file browser to navigate to, and select your chosen video file, or alternatively you can simply drag you video into the main panel to import it.

Whichever route you take, you will end up with your video file loaded in like this.

Now you can edit the video as you need, Avidemux contains a wealth of features to enable the full spectrum of editing tasks to be completed. However, here we are going to look at the cropping tool, so on to the next step.

3. Editing Video

Avidemux has some idiosyncrasies in terms of operation, one of those is that to be able to edit any video, you have to choose your output format. Don’t worry though, this is easy, just use the dropdown at the side to choose the output format you want as can be seen here.

Once that is set you are free to start editing your footage.

4. Cropping

It is important to understand how the editing process works in Avidemux, everything is accessed via the filters menu Video>Filters and from here you are faced with a new interface that enables you to choose the component you wish to use.

Selecting ‘Crop’ from the menu and pressing the green plus symbol at the bottom activated the crop tool and presents you with yet another view that allows you to adjust the crop to your tastes.

5. Cropping controls

There are two options for cropping, you can use the Auto crop feature, which will detect any black lines and crop the footage between them, or if you are using the crop tool for something else, or just want to do it manually, you can set the crop via the left right top and bottom boxes. Values input here are the number of pixels from that edge the crop extends, as you are setting it, this is displayed with a green block signifying the area of the image that will be removed.

You can adjust this independently for all 4 edges as you wish.

Once you are happy with the crop, you click Ok and it takes you back to the familiar filter menu where you can use other components to perform more editing if you need.

6. Saving the crop

One of the most common points of confusion with Avidemux comes at this point, as your video will look no different to when you started, and many think they have done something wrong, but this is another part of Avidemux workflow. These filters can only be applied when the video is reencoded, and you do that through the file>save menu.

Selecting this presents the familiar export dialogue and allows you to choose the name and destination of the file. Once that is done you click OK and you will see Avidemux processing your file and re-rendering it in this dialogue box.

How long it takes will depend on a few factors, how many other effects have been added, how fast a processor your computer has, and how large and what resolution the video is. Format also plays a part in the process too, with some formats taking less time to encode than others. Once it has finished, you can view your video and see the crop in action.

As we can see, although there are a few aspects of the workflow that are a little unintuitive, cropping video in Avidemux is a straightforward process that anyone can accomplish with a bit of patience.

One of the key things to remember with Avidemux is that you apply all of your filters before re-encoding, this again is a question of patience and a bit of organization to ensure everything you wish to do is completed in order.

Avidemux is a great piece of software, it lacks the polish of some of its commercial rivals of course, but behind the sometimes clunky interface there is a very broad range of features that allow you to accomplish more or less any editing task you may want. In terms of free programs this is about as good as it gets, and the output is, without a doubt, great quality. For anyone looking for a free solution to video editing problems, and who do not mind a learning process Avidemux provides a useful tool.

An Easier Way to Crop a Video with Filmora

Filmora Video Editor is a powerful program that allows you to create stunning video clips in only a few clicks. This video editing software provides users with a variety of tools for editing videos. It also includes a user-friendly interface for editing home films on Windows PCs, Macs, and Linux devices. To crop a video, these are to follow:

Step 1: Open a video that you want to edit. Go to “Import” and choose the file that you want to upload and put it in the Media Library.

Step 2: Select the “Crop and Zoom” icon in the Filmora editing tool.

Step 3: To alter the size of the crop frame, drag the pointer from any corner of your video preview window.

Step 4: When you’ve changed it to your liking, click the green “OK” button. As a result, you may effortlessly add or remove any element of a video clip on Filmora.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Cropping a video, to bring focus onto the important aspects and remove the extraneous parts of the scene, is one of the most valuable tools available to a video editor. It can be used as mentioned to ensure the viewer focuses on what is important, but also to magnify objects on the screen, such as with footage of nature. It has many uses, and one of the best tools available for cropping video is the free program Avidemux. Here we are going to go through the process of getting Avidemux running on your system and cropping some video.

---

If Avidemux is too complicate for you, you can consider Wondershare Filmora , which is an easy-to-use video editing tool to crop videos within several click. Download the free trial version blow.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Crop a Video with Avidemux

1. Installation

You can find Avidemux for download here , it is available for a wide range of platforms, just download the version that fits your needs. Once downloaded, install in the standard way for your platform, this is the Wndows version (64bit).

One point of note during installation is that you can choose which parts of the program you wish to install. It is a very small footprint and for the best performance it is wise to simply install everything.

Once installed you will be presented with the program as seen here.

2. Importing Video

The next step is importing video. This can be done in two ways, by clicking the file folder icon at the top left you open a standard file browser to navigate to, and select your chosen video file, or alternatively you can simply drag you video into the main panel to import it.

Whichever route you take, you will end up with your video file loaded in like this.

Now you can edit the video as you need, Avidemux contains a wealth of features to enable the full spectrum of editing tasks to be completed. However, here we are going to look at the cropping tool, so on to the next step.

3. Editing Video

Avidemux has some idiosyncrasies in terms of operation, one of those is that to be able to edit any video, you have to choose your output format. Don’t worry though, this is easy, just use the dropdown at the side to choose the output format you want as can be seen here.

Once that is set you are free to start editing your footage.

4. Cropping

It is important to understand how the editing process works in Avidemux, everything is accessed via the filters menu Video>Filters and from here you are faced with a new interface that enables you to choose the component you wish to use.

Selecting ‘Crop’ from the menu and pressing the green plus symbol at the bottom activated the crop tool and presents you with yet another view that allows you to adjust the crop to your tastes.

5. Cropping controls

There are two options for cropping, you can use the Auto crop feature, which will detect any black lines and crop the footage between them, or if you are using the crop tool for something else, or just want to do it manually, you can set the crop via the left right top and bottom boxes. Values input here are the number of pixels from that edge the crop extends, as you are setting it, this is displayed with a green block signifying the area of the image that will be removed.

You can adjust this independently for all 4 edges as you wish.

Once you are happy with the crop, you click Ok and it takes you back to the familiar filter menu where you can use other components to perform more editing if you need.

6. Saving the crop

One of the most common points of confusion with Avidemux comes at this point, as your video will look no different to when you started, and many think they have done something wrong, but this is another part of Avidemux workflow. These filters can only be applied when the video is reencoded, and you do that through the file>save menu.

Selecting this presents the familiar export dialogue and allows you to choose the name and destination of the file. Once that is done you click OK and you will see Avidemux processing your file and re-rendering it in this dialogue box.

How long it takes will depend on a few factors, how many other effects have been added, how fast a processor your computer has, and how large and what resolution the video is. Format also plays a part in the process too, with some formats taking less time to encode than others. Once it has finished, you can view your video and see the crop in action.

As we can see, although there are a few aspects of the workflow that are a little unintuitive, cropping video in Avidemux is a straightforward process that anyone can accomplish with a bit of patience.

One of the key things to remember with Avidemux is that you apply all of your filters before re-encoding, this again is a question of patience and a bit of organization to ensure everything you wish to do is completed in order.

Avidemux is a great piece of software, it lacks the polish of some of its commercial rivals of course, but behind the sometimes clunky interface there is a very broad range of features that allow you to accomplish more or less any editing task you may want. In terms of free programs this is about as good as it gets, and the output is, without a doubt, great quality. For anyone looking for a free solution to video editing problems, and who do not mind a learning process Avidemux provides a useful tool.

An Easier Way to Crop a Video with Filmora

Filmora Video Editor is a powerful program that allows you to create stunning video clips in only a few clicks. This video editing software provides users with a variety of tools for editing videos. It also includes a user-friendly interface for editing home films on Windows PCs, Macs, and Linux devices. To crop a video, these are to follow:

Step 1: Open a video that you want to edit. Go to “Import” and choose the file that you want to upload and put it in the Media Library.

Step 2: Select the “Crop and Zoom” icon in the Filmora editing tool.

Step 3: To alter the size of the crop frame, drag the pointer from any corner of your video preview window.

Step 4: When you’ve changed it to your liking, click the green “OK” button. As a result, you may effortlessly add or remove any element of a video clip on Filmora.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

The Complete Guide to Running Linux on a Chromebook (Updated 2023)

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Unleash Your Creativity: How to Edit GoPro Videos on Mac

How to edit GoPro video on Mac

Liza Brown

Oct 26, 2023• Proven solutions

Are you having trouble using a GoPro edit app on Mac? GoPro cameras make it reasonably easy to shoot and transfer videos, but editing them is a whole different story. You have to make sure you’re using the right video editor on Mac; otherwise, you’ll keep trying to figure out how to edit those videos you captured.

Editing videos is a skill that requires a lot of practice and patience, but thankfully, there are editing programs that make the process much more comfortable and straightforward.

• Section1.What program can I use to edit Gopro Videos?
• Section2.Basic Editing Tips for Gopro Video on Filmora
• Section3.Advance Editing tips for Gopro Video on Filmora

Section 1. What program can I use to edit Gopro Videos?

So what’s the best video editing software for Mac? There are plenty of GoPro edit apps, but the best video editing app for Mac isWondershare Filmora X – a free video editor that lets you edit videos like a pro. Filmora video editor has several cool features and a user-friendly interface that anyone can understand.

First, download Wondershare Filmora X for free. After installing it, you have to import your GoPro videos. Here is the step to do that:

Click on File, then Import Media. Another drop-down menu will open from which you can select whether you want to import media files, a media folder, media from your camera or phone, or with Filmora’s Instant Cutter Tool.

If you have a Mac with a Touch Bar, you can use the Touch Bar Controls to import your videos.

You May Also Like: Touch Bar on Wondershare Filmora for Mac

Section 2. Basic Editing Tips for Gopro Video on Filmora

Now that you’ve imported your videos, it’s time to edit Gopro video with Filmora X. Filmora X video editor makes editing not only easy but also fun. Here are some of its features: splitting videos, resizing images, and combining video clips. You can also add effects, stickers, audio, titles, and split screens.

1. Effects - Filters and Overlays

Want to give your videos a vintage look? You can do that by adding filters and overlays! Simply click on the Effects tab and select whichever filter or overlay you want to add to your video. Adding new layers using overlays is a great way to give your videos a new look.

If you don’t like the filters or overlays you’ve chosen, you can easily remove them by clicking them in the timeline and pressing Delete on your keyboard.

2. Elements and Transitions

If you’re feeling a little creative, add some stickers or motion graphics to your GoPro videos. To add elements, head over to the Elements tab. There are 150 elements in Filmora for Mac, and with a subscription, you can get more.

• Drag an element to the timeline to apply it. If you want to remove it, simply right-click on it and hit the Delete button.
• In order to make your videos look smooth, you can switch to the Transition tab and select the transition you want to use and then drag and drop it in the timeline between the two videos.

3. Split Screen and Audio

Split Screen is a powerful feature that allows you to edit multiple videos in two or more segments. You might need it if you’re editing videos that show the same scene from different angles. On Filmora, there are over thirty layouts that let you add six different videos.

You can also add audio to your GoPro videos on Mac to make them more attractive. Filmora video editor for Mac has copyright-free music, but you can import your own music, too, using the same import methods described above.

• Once imported, drag and drop your audio into the Audio Track in the timeline.
• If you want to edit the file, double-click on it and it’ll take you to the Audio editing panel where you can apply effects and change the volume and pitch.

Section 3. Advance Editing tips for Gopro Video on Filmora

If you want to add even more pizzazz to your videos, then why not look into other powerful features like motion tracking, color match, and audio ducking? They may sound complicated, but in reality, they’re easy to use.

1. Motion Tracking

his feature lets you track objects in your videos so that other objects can move along with them. If you have a video in which you want to make it look like you have wings and you’re flying, then you can align the movement of the wings with the movement of your body using the motion tracking feature. Here are the steps you need to take to track objects:

Step 1. Double-click the video in the timeline and then check the Motion Tracking box.

Step 2. Place the Target Box over the object you want to track and click Start Tracking.

Step 3. Select the media that you want to move with the tracked object. Remember that this media already has to be in the timeline.

Step 4. Adjust the size or position of whatever media you selected in the previous step.

2. Color Match

Wondershare video editor for Mac also lets you color correct multiple videos as a batch. If you have videos that have similar lighting and you want to change their colors quickly to make them consistent, then you should use color match. Here’s how you can use it:

Step 1. Color correct one video in the timeline like how you’d typically color correct any other video.

Step 2. Place the playback line on the video you color corrected and then select the other videos you want to color correct.

Step 3. On the toolbar, click the color icon, and a drop-down menu will appear from which you’ll have to click on Color Match. After a new window opens, you can adjust the level of color correction however, you wish.

If you feel the colors don’t match, you can open the Comparison Preview and use the slider to adjust the colors.

3. Audio Ducking

If you want to temporarily reduce one audio track volume so that another is more audible, use audio ducking. You can use it in videos where you want to decrease the volume of music when someone starts speaking to hear them better. Here are the steps:

Step 1. Select the audio track you want to make more audible.

Step 2. Right-click on it and click on Adjust Audio.

Step 3. Check the “lower the volume of other clips” box.

Step 4. Once you press OK, the volume of every other audio track will be lowered. You can adjust the ducking level to achieve your desired effect.

Mastering these three features will make your videos stand out, so spend some time playing around with them.

Conclusion

Editing GoPro videos on Mac can be confusing, but it isn’t as difficult as people make it out. Find the video editing software that will make all tasks easy for you, and you’re good to go. Download Filmora X for Mac because it has tons of features that make video editing fun and simple, and you’ll be able to master them quickly. Not only that, but a Filmora free download also saves you hundreds of dollars you would otherwise spend on other overly complicated software.

You May Also Like: Tips and Tricks for GoPro: Get the Most from Your GoPro

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Are you having trouble using a GoPro edit app on Mac? GoPro cameras make it reasonably easy to shoot and transfer videos, but editing them is a whole different story. You have to make sure you’re using the right video editor on Mac; otherwise, you’ll keep trying to figure out how to edit those videos you captured.

Editing videos is a skill that requires a lot of practice and patience, but thankfully, there are editing programs that make the process much more comfortable and straightforward.

• Section1.What program can I use to edit Gopro Videos?
• Section2.Basic Editing Tips for Gopro Video on Filmora
• Section3.Advance Editing tips for Gopro Video on Filmora

Section 1. What program can I use to edit Gopro Videos?

So what’s the best video editing software for Mac? There are plenty of GoPro edit apps, but the best video editing app for Mac isWondershare Filmora X – a free video editor that lets you edit videos like a pro. Filmora video editor has several cool features and a user-friendly interface that anyone can understand.

First, download Wondershare Filmora X for free. After installing it, you have to import your GoPro videos. Here is the step to do that:

Click on File, then Import Media. Another drop-down menu will open from which you can select whether you want to import media files, a media folder, media from your camera or phone, or with Filmora’s Instant Cutter Tool.

If you have a Mac with a Touch Bar, you can use the Touch Bar Controls to import your videos.

You May Also Like: Touch Bar on Wondershare Filmora for Mac

Section 2. Basic Editing Tips for Gopro Video on Filmora

Now that you’ve imported your videos, it’s time to edit Gopro video with Filmora X. Filmora X video editor makes editing not only easy but also fun. Here are some of its features: splitting videos, resizing images, and combining video clips. You can also add effects, stickers, audio, titles, and split screens.

1. Effects - Filters and Overlays

Want to give your videos a vintage look? You can do that by adding filters and overlays! Simply click on the Effects tab and select whichever filter or overlay you want to add to your video. Adding new layers using overlays is a great way to give your videos a new look.

If you don’t like the filters or overlays you’ve chosen, you can easily remove them by clicking them in the timeline and pressing Delete on your keyboard.

2. Elements and Transitions

If you’re feeling a little creative, add some stickers or motion graphics to your GoPro videos. To add elements, head over to the Elements tab. There are 150 elements in Filmora for Mac, and with a subscription, you can get more.

• Drag an element to the timeline to apply it. If you want to remove it, simply right-click on it and hit the Delete button.
• In order to make your videos look smooth, you can switch to the Transition tab and select the transition you want to use and then drag and drop it in the timeline between the two videos.

3. Split Screen and Audio

Split Screen is a powerful feature that allows you to edit multiple videos in two or more segments. You might need it if you’re editing videos that show the same scene from different angles. On Filmora, there are over thirty layouts that let you add six different videos.

You can also add audio to your GoPro videos on Mac to make them more attractive. Filmora video editor for Mac has copyright-free music, but you can import your own music, too, using the same import methods described above.

• Once imported, drag and drop your audio into the Audio Track in the timeline.
• If you want to edit the file, double-click on it and it’ll take you to the Audio editing panel where you can apply effects and change the volume and pitch.

Section 3. Advance Editing tips for Gopro Video on Filmora

If you want to add even more pizzazz to your videos, then why not look into other powerful features like motion tracking, color match, and audio ducking? They may sound complicated, but in reality, they’re easy to use.

1. Motion Tracking

his feature lets you track objects in your videos so that other objects can move along with them. If you have a video in which you want to make it look like you have wings and you’re flying, then you can align the movement of the wings with the movement of your body using the motion tracking feature. Here are the steps you need to take to track objects:

Step 1. Double-click the video in the timeline and then check the Motion Tracking box.

Step 2. Place the Target Box over the object you want to track and click Start Tracking.

Step 3. Select the media that you want to move with the tracked object. Remember that this media already has to be in the timeline.

Step 4. Adjust the size or position of whatever media you selected in the previous step.

2. Color Match

Wondershare video editor for Mac also lets you color correct multiple videos as a batch. If you have videos that have similar lighting and you want to change their colors quickly to make them consistent, then you should use color match. Here’s how you can use it:

Step 1. Color correct one video in the timeline like how you’d typically color correct any other video.

Step 2. Place the playback line on the video you color corrected and then select the other videos you want to color correct.

Step 3. On the toolbar, click the color icon, and a drop-down menu will appear from which you’ll have to click on Color Match. After a new window opens, you can adjust the level of color correction however, you wish.

If you feel the colors don’t match, you can open the Comparison Preview and use the slider to adjust the colors.

3. Audio Ducking

If you want to temporarily reduce one audio track volume so that another is more audible, use audio ducking. You can use it in videos where you want to decrease the volume of music when someone starts speaking to hear them better. Here are the steps:

Step 1. Select the audio track you want to make more audible.

Step 2. Right-click on it and click on Adjust Audio.

Step 3. Check the “lower the volume of other clips” box.

Step 4. Once you press OK, the volume of every other audio track will be lowered. You can adjust the ducking level to achieve your desired effect.

Mastering these three features will make your videos stand out, so spend some time playing around with them.

Conclusion

Editing GoPro videos on Mac can be confusing, but it isn’t as difficult as people make it out. Find the video editing software that will make all tasks easy for you, and you’re good to go. Download Filmora X for Mac because it has tons of features that make video editing fun and simple, and you’ll be able to master them quickly. Not only that, but a Filmora free download also saves you hundreds of dollars you would otherwise spend on other overly complicated software.

You May Also Like: Tips and Tricks for GoPro: Get the Most from Your GoPro

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Are you having trouble using a GoPro edit app on Mac? GoPro cameras make it reasonably easy to shoot and transfer videos, but editing them is a whole different story. You have to make sure you’re using the right video editor on Mac; otherwise, you’ll keep trying to figure out how to edit those videos you captured.

Editing videos is a skill that requires a lot of practice and patience, but thankfully, there are editing programs that make the process much more comfortable and straightforward.

• Section1.What program can I use to edit Gopro Videos?
• Section2.Basic Editing Tips for Gopro Video on Filmora
• Section3.Advance Editing tips for Gopro Video on Filmora

Section 1. What program can I use to edit Gopro Videos?

So what’s the best video editing software for Mac? There are plenty of GoPro edit apps, but the best video editing app for Mac isWondershare Filmora X – a free video editor that lets you edit videos like a pro. Filmora video editor has several cool features and a user-friendly interface that anyone can understand.

First, download Wondershare Filmora X for free. After installing it, you have to import your GoPro videos. Here is the step to do that:

Click on File, then Import Media. Another drop-down menu will open from which you can select whether you want to import media files, a media folder, media from your camera or phone, or with Filmora’s Instant Cutter Tool.

If you have a Mac with a Touch Bar, you can use the Touch Bar Controls to import your videos.

You May Also Like: Touch Bar on Wondershare Filmora for Mac

Section 2. Basic Editing Tips for Gopro Video on Filmora

Now that you’ve imported your videos, it’s time to edit Gopro video with Filmora X. Filmora X video editor makes editing not only easy but also fun. Here are some of its features: splitting videos, resizing images, and combining video clips. You can also add effects, stickers, audio, titles, and split screens.

1. Effects - Filters and Overlays

Want to give your videos a vintage look? You can do that by adding filters and overlays! Simply click on the Effects tab and select whichever filter or overlay you want to add to your video. Adding new layers using overlays is a great way to give your videos a new look.

If you don’t like the filters or overlays you’ve chosen, you can easily remove them by clicking them in the timeline and pressing Delete on your keyboard.

2. Elements and Transitions

If you’re feeling a little creative, add some stickers or motion graphics to your GoPro videos. To add elements, head over to the Elements tab. There are 150 elements in Filmora for Mac, and with a subscription, you can get more.

• Drag an element to the timeline to apply it. If you want to remove it, simply right-click on it and hit the Delete button.
• In order to make your videos look smooth, you can switch to the Transition tab and select the transition you want to use and then drag and drop it in the timeline between the two videos.

3. Split Screen and Audio

Split Screen is a powerful feature that allows you to edit multiple videos in two or more segments. You might need it if you’re editing videos that show the same scene from different angles. On Filmora, there are over thirty layouts that let you add six different videos.

You can also add audio to your GoPro videos on Mac to make them more attractive. Filmora video editor for Mac has copyright-free music, but you can import your own music, too, using the same import methods described above.

• Once imported, drag and drop your audio into the Audio Track in the timeline.
• If you want to edit the file, double-click on it and it’ll take you to the Audio editing panel where you can apply effects and change the volume and pitch.

Section 3. Advance Editing tips for Gopro Video on Filmora

If you want to add even more pizzazz to your videos, then why not look into other powerful features like motion tracking, color match, and audio ducking? They may sound complicated, but in reality, they’re easy to use.

1. Motion Tracking

his feature lets you track objects in your videos so that other objects can move along with them. If you have a video in which you want to make it look like you have wings and you’re flying, then you can align the movement of the wings with the movement of your body using the motion tracking feature. Here are the steps you need to take to track objects:

Step 1. Double-click the video in the timeline and then check the Motion Tracking box.

Step 2. Place the Target Box over the object you want to track and click Start Tracking.

Step 3. Select the media that you want to move with the tracked object. Remember that this media already has to be in the timeline.

Step 4. Adjust the size or position of whatever media you selected in the previous step.

2. Color Match

Wondershare video editor for Mac also lets you color correct multiple videos as a batch. If you have videos that have similar lighting and you want to change their colors quickly to make them consistent, then you should use color match. Here’s how you can use it:

Step 1. Color correct one video in the timeline like how you’d typically color correct any other video.

Step 2. Place the playback line on the video you color corrected and then select the other videos you want to color correct.

Step 3. On the toolbar, click the color icon, and a drop-down menu will appear from which you’ll have to click on Color Match. After a new window opens, you can adjust the level of color correction however, you wish.

If you feel the colors don’t match, you can open the Comparison Preview and use the slider to adjust the colors.

3. Audio Ducking

If you want to temporarily reduce one audio track volume so that another is more audible, use audio ducking. You can use it in videos where you want to decrease the volume of music when someone starts speaking to hear them better. Here are the steps:

Step 1. Select the audio track you want to make more audible.

Step 2. Right-click on it and click on Adjust Audio.

Step 3. Check the “lower the volume of other clips” box.

Step 4. Once you press OK, the volume of every other audio track will be lowered. You can adjust the ducking level to achieve your desired effect.

Mastering these three features will make your videos stand out, so spend some time playing around with them.

Conclusion

Editing GoPro videos on Mac can be confusing, but it isn’t as difficult as people make it out. Find the video editing software that will make all tasks easy for you, and you’re good to go. Download Filmora X for Mac because it has tons of features that make video editing fun and simple, and you’ll be able to master them quickly. Not only that, but a Filmora free download also saves you hundreds of dollars you would otherwise spend on other overly complicated software.

You May Also Like: Tips and Tricks for GoPro: Get the Most from Your GoPro

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Are you having trouble using a GoPro edit app on Mac? GoPro cameras make it reasonably easy to shoot and transfer videos, but editing them is a whole different story. You have to make sure you’re using the right video editor on Mac; otherwise, you’ll keep trying to figure out how to edit those videos you captured.

Editing videos is a skill that requires a lot of practice and patience, but thankfully, there are editing programs that make the process much more comfortable and straightforward.

• Section1.What program can I use to edit Gopro Videos?
• Section2.Basic Editing Tips for Gopro Video on Filmora
• Section3.Advance Editing tips for Gopro Video on Filmora

Section 1. What program can I use to edit Gopro Videos?

So what’s the best video editing software for Mac? There are plenty of GoPro edit apps, but the best video editing app for Mac isWondershare Filmora X – a free video editor that lets you edit videos like a pro. Filmora video editor has several cool features and a user-friendly interface that anyone can understand.

First, download Wondershare Filmora X for free. After installing it, you have to import your GoPro videos. Here is the step to do that:

Click on File, then Import Media. Another drop-down menu will open from which you can select whether you want to import media files, a media folder, media from your camera or phone, or with Filmora’s Instant Cutter Tool.

If you have a Mac with a Touch Bar, you can use the Touch Bar Controls to import your videos.

You May Also Like: Touch Bar on Wondershare Filmora for Mac

Section 2. Basic Editing Tips for Gopro Video on Filmora

Now that you’ve imported your videos, it’s time to edit Gopro video with Filmora X. Filmora X video editor makes editing not only easy but also fun. Here are some of its features: splitting videos, resizing images, and combining video clips. You can also add effects, stickers, audio, titles, and split screens.

1. Effects - Filters and Overlays

Want to give your videos a vintage look? You can do that by adding filters and overlays! Simply click on the Effects tab and select whichever filter or overlay you want to add to your video. Adding new layers using overlays is a great way to give your videos a new look.

If you don’t like the filters or overlays you’ve chosen, you can easily remove them by clicking them in the timeline and pressing Delete on your keyboard.

2. Elements and Transitions

If you’re feeling a little creative, add some stickers or motion graphics to your GoPro videos. To add elements, head over to the Elements tab. There are 150 elements in Filmora for Mac, and with a subscription, you can get more.

• Drag an element to the timeline to apply it. If you want to remove it, simply right-click on it and hit the Delete button.
• In order to make your videos look smooth, you can switch to the Transition tab and select the transition you want to use and then drag and drop it in the timeline between the two videos.

3. Split Screen and Audio

Split Screen is a powerful feature that allows you to edit multiple videos in two or more segments. You might need it if you’re editing videos that show the same scene from different angles. On Filmora, there are over thirty layouts that let you add six different videos.

You can also add audio to your GoPro videos on Mac to make them more attractive. Filmora video editor for Mac has copyright-free music, but you can import your own music, too, using the same import methods described above.

• Once imported, drag and drop your audio into the Audio Track in the timeline.
• If you want to edit the file, double-click on it and it’ll take you to the Audio editing panel where you can apply effects and change the volume and pitch.

Section 3. Advance Editing tips for Gopro Video on Filmora

If you want to add even more pizzazz to your videos, then why not look into other powerful features like motion tracking, color match, and audio ducking? They may sound complicated, but in reality, they’re easy to use.

1. Motion Tracking

his feature lets you track objects in your videos so that other objects can move along with them. If you have a video in which you want to make it look like you have wings and you’re flying, then you can align the movement of the wings with the movement of your body using the motion tracking feature. Here are the steps you need to take to track objects:

Step 1. Double-click the video in the timeline and then check the Motion Tracking box.

Step 2. Place the Target Box over the object you want to track and click Start Tracking.

Step 3. Select the media that you want to move with the tracked object. Remember that this media already has to be in the timeline.

Step 4. Adjust the size or position of whatever media you selected in the previous step.

2. Color Match

Wondershare video editor for Mac also lets you color correct multiple videos as a batch. If you have videos that have similar lighting and you want to change their colors quickly to make them consistent, then you should use color match. Here’s how you can use it:

Step 1. Color correct one video in the timeline like how you’d typically color correct any other video.

Step 2. Place the playback line on the video you color corrected and then select the other videos you want to color correct.

Step 3. On the toolbar, click the color icon, and a drop-down menu will appear from which you’ll have to click on Color Match. After a new window opens, you can adjust the level of color correction however, you wish.

If you feel the colors don’t match, you can open the Comparison Preview and use the slider to adjust the colors.

3. Audio Ducking

If you want to temporarily reduce one audio track volume so that another is more audible, use audio ducking. You can use it in videos where you want to decrease the volume of music when someone starts speaking to hear them better. Here are the steps:

Step 1. Select the audio track you want to make more audible.

Step 2. Right-click on it and click on Adjust Audio.

Step 3. Check the “lower the volume of other clips” box.

Step 4. Once you press OK, the volume of every other audio track will be lowered. You can adjust the ducking level to achieve your desired effect.

Mastering these three features will make your videos stand out, so spend some time playing around with them.

Conclusion

Editing GoPro videos on Mac can be confusing, but it isn’t as difficult as people make it out. Find the video editing software that will make all tasks easy for you, and you’re good to go. Download Filmora X for Mac because it has tons of features that make video editing fun and simple, and you’ll be able to master them quickly. Not only that, but a Filmora free download also saves you hundreds of dollars you would otherwise spend on other overly complicated software.

You May Also Like: Tips and Tricks for GoPro: Get the Most from Your GoPro

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Film Like a Pro: A Beginner’s Guide to Making Movies

Easy Movie Maker: How to Easily Make a Movie

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever stored various videos and photos on a memory card or on the computer? Why not create a movie to show them off? Once finish making a great movie, you can share it with others in a variety of ways including on YouTube, Facebook and Instagram. Your followers will be amazed at the extraordinarily delightful works. In fact, making a movie using your own photos, videos and audio is really easy.

Updates: We’ve updated this list of the best free easy movie makers in 2021, you can check it here about Top 10 best free Easy Movie Makers. In the article below, I’ll share with you about how to use Wondershare Filmora, which is one of the best easy to use video editing software designed for beginners to touch up your videos with ease. You can make photo slideshow videos, or common family videos and directly share them to YouTube or save as DVD with Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Make a Video with Wondershare Filmora Easy Movie Maker

Below, we will show you have to use this easy movie maker to create a video with Filmora in clicks.

1. Import your files and arrange the order

Open Wondershare Filmora, click the “Import” button and use the navigation import panel to load media files. You can also directly drag and drop your media files to the program. You can trim or cut the video clips in the timeline with options in the Toolbox

2. Making Stunning Videos with Various Effects & Filters

After you’ve added your media files for editing and placed them on the Timeline, double click the target file and adjust video quality by changing the Contrast, Saturation, Brightness, Hue as you like. Then return to the “Effects” tab and pick the special effects you want to apply. Drag and drop them onto the “Effect” track. You can use multiple effects on the same segment of video.

Go the “Transition” tab. Then join your clips with one or several different transitions. Click “Transition” to choose the ones you want to add and then drag them between the video clips. Then double click to change the Time Duration and click “Apply to All” if you want all transition effects to have the same duration.

If you want to add words to the video, click the “Text” button, select the text type you like, and drag the icon to the Text track. You can stretch the icon over the whole track to have the titles appear during the whole movie, or just over a part of it. Then double click it, type in the texts and customize the font, size, color and effect in the editing window.

3. Save the video in the format of your choice

When everything is done, hit the “Create” button, you’ll see several options: save as a video file, convert it for viewing on your mobile phone or tablet, directly upload to your YouTube or Facebook account and burn to DVD. Choose an output method as you like and click “Create”. After a few seconds, a folder with the newly reformatted video will open automatically.

Now download this easy movie maker and start making your own movies!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever stored various videos and photos on a memory card or on the computer? Why not create a movie to show them off? Once finish making a great movie, you can share it with others in a variety of ways including on YouTube, Facebook and Instagram. Your followers will be amazed at the extraordinarily delightful works. In fact, making a movie using your own photos, videos and audio is really easy.

Updates: We’ve updated this list of the best free easy movie makers in 2021, you can check it here about Top 10 best free Easy Movie Makers. In the article below, I’ll share with you about how to use Wondershare Filmora, which is one of the best easy to use video editing software designed for beginners to touch up your videos with ease. You can make photo slideshow videos, or common family videos and directly share them to YouTube or save as DVD with Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Make a Video with Wondershare Filmora Easy Movie Maker

Below, we will show you have to use this easy movie maker to create a video with Filmora in clicks.

1. Import your files and arrange the order

Open Wondershare Filmora, click the “Import” button and use the navigation import panel to load media files. You can also directly drag and drop your media files to the program. You can trim or cut the video clips in the timeline with options in the Toolbox

2. Making Stunning Videos with Various Effects & Filters

After you’ve added your media files for editing and placed them on the Timeline, double click the target file and adjust video quality by changing the Contrast, Saturation, Brightness, Hue as you like. Then return to the “Effects” tab and pick the special effects you want to apply. Drag and drop them onto the “Effect” track. You can use multiple effects on the same segment of video.

Go the “Transition” tab. Then join your clips with one or several different transitions. Click “Transition” to choose the ones you want to add and then drag them between the video clips. Then double click to change the Time Duration and click “Apply to All” if you want all transition effects to have the same duration.

If you want to add words to the video, click the “Text” button, select the text type you like, and drag the icon to the Text track. You can stretch the icon over the whole track to have the titles appear during the whole movie, or just over a part of it. Then double click it, type in the texts and customize the font, size, color and effect in the editing window.

3. Save the video in the format of your choice

When everything is done, hit the “Create” button, you’ll see several options: save as a video file, convert it for viewing on your mobile phone or tablet, directly upload to your YouTube or Facebook account and burn to DVD. Choose an output method as you like and click “Create”. After a few seconds, a folder with the newly reformatted video will open automatically.

Now download this easy movie maker and start making your own movies!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever stored various videos and photos on a memory card or on the computer? Why not create a movie to show them off? Once finish making a great movie, you can share it with others in a variety of ways including on YouTube, Facebook and Instagram. Your followers will be amazed at the extraordinarily delightful works. In fact, making a movie using your own photos, videos and audio is really easy.

Updates: We’ve updated this list of the best free easy movie makers in 2021, you can check it here about Top 10 best free Easy Movie Makers. In the article below, I’ll share with you about how to use Wondershare Filmora, which is one of the best easy to use video editing software designed for beginners to touch up your videos with ease. You can make photo slideshow videos, or common family videos and directly share them to YouTube or save as DVD with Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Make a Video with Wondershare Filmora Easy Movie Maker

Below, we will show you have to use this easy movie maker to create a video with Filmora in clicks.

1. Import your files and arrange the order

Open Wondershare Filmora, click the “Import” button and use the navigation import panel to load media files. You can also directly drag and drop your media files to the program. You can trim or cut the video clips in the timeline with options in the Toolbox

2. Making Stunning Videos with Various Effects & Filters

After you’ve added your media files for editing and placed them on the Timeline, double click the target file and adjust video quality by changing the Contrast, Saturation, Brightness, Hue as you like. Then return to the “Effects” tab and pick the special effects you want to apply. Drag and drop them onto the “Effect” track. You can use multiple effects on the same segment of video.

Go the “Transition” tab. Then join your clips with one or several different transitions. Click “Transition” to choose the ones you want to add and then drag them between the video clips. Then double click to change the Time Duration and click “Apply to All” if you want all transition effects to have the same duration.

If you want to add words to the video, click the “Text” button, select the text type you like, and drag the icon to the Text track. You can stretch the icon over the whole track to have the titles appear during the whole movie, or just over a part of it. Then double click it, type in the texts and customize the font, size, color and effect in the editing window.

3. Save the video in the format of your choice

When everything is done, hit the “Create” button, you’ll see several options: save as a video file, convert it for viewing on your mobile phone or tablet, directly upload to your YouTube or Facebook account and burn to DVD. Choose an output method as you like and click “Create”. After a few seconds, a folder with the newly reformatted video will open automatically.

Now download this easy movie maker and start making your own movies!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever stored various videos and photos on a memory card or on the computer? Why not create a movie to show them off? Once finish making a great movie, you can share it with others in a variety of ways including on YouTube, Facebook and Instagram. Your followers will be amazed at the extraordinarily delightful works. In fact, making a movie using your own photos, videos and audio is really easy.

Updates: We’ve updated this list of the best free easy movie makers in 2021, you can check it here about Top 10 best free Easy Movie Makers. In the article below, I’ll share with you about how to use Wondershare Filmora, which is one of the best easy to use video editing software designed for beginners to touch up your videos with ease. You can make photo slideshow videos, or common family videos and directly share them to YouTube or save as DVD with Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Make a Video with Wondershare Filmora Easy Movie Maker

Below, we will show you have to use this easy movie maker to create a video with Filmora in clicks.

1. Import your files and arrange the order

Open Wondershare Filmora, click the “Import” button and use the navigation import panel to load media files. You can also directly drag and drop your media files to the program. You can trim or cut the video clips in the timeline with options in the Toolbox

2. Making Stunning Videos with Various Effects & Filters

After you’ve added your media files for editing and placed them on the Timeline, double click the target file and adjust video quality by changing the Contrast, Saturation, Brightness, Hue as you like. Then return to the “Effects” tab and pick the special effects you want to apply. Drag and drop them onto the “Effect” track. You can use multiple effects on the same segment of video.

Go the “Transition” tab. Then join your clips with one or several different transitions. Click “Transition” to choose the ones you want to add and then drag them between the video clips. Then double click to change the Time Duration and click “Apply to All” if you want all transition effects to have the same duration.

If you want to add words to the video, click the “Text” button, select the text type you like, and drag the icon to the Text track. You can stretch the icon over the whole track to have the titles appear during the whole movie, or just over a part of it. Then double click it, type in the texts and customize the font, size, color and effect in the editing window.

3. Save the video in the format of your choice

When everything is done, hit the “Create” button, you’ll see several options: save as a video file, convert it for viewing on your mobile phone or tablet, directly upload to your YouTube or Facebook account and burn to DVD. Choose an output method as you like and click “Create”. After a few seconds, a folder with the newly reformatted video will open automatically.

Now download this easy movie maker and start making your own movies!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: