Chromebook Linux Installation Tutorial: The Ultimate Guide

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

The Ultimate Guide to Flipping Videos in Final Cut Pro

4 Detailed Steps to Flip a Clip in Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.

---

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

---

How to Flip a Clip in Final Cut Pro

As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.

• The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
• The Rotation point allows you to rotate the image around its anchor points.
• The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
• The Anchor X and Y allows you to Move the image’s center point.

---

An Easier Way to Flip a Clip in Final Cut Pro Alternative

If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.

Features:

• Allow removing the background noise
• Editing videos and export in multiple formats
• Changing the background and adding the special effects to it
• Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.

Step 2: Flipping the whole video:

When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.

• Flipping only a single part of the video:

Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.

• Exporting the flip video:

After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.

Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.

---

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

---

How to Flip a Clip in Final Cut Pro

As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.

• The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
• The Rotation point allows you to rotate the image around its anchor points.
• The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
• The Anchor X and Y allows you to Move the image’s center point.

---

An Easier Way to Flip a Clip in Final Cut Pro Alternative

If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.

Features:

• Allow removing the background noise
• Editing videos and export in multiple formats
• Changing the background and adding the special effects to it
• Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.

Step 2: Flipping the whole video:

When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.

• Flipping only a single part of the video:

Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.

• Exporting the flip video:

After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.

Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.

---

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

---

How to Flip a Clip in Final Cut Pro

As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.

• The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
• The Rotation point allows you to rotate the image around its anchor points.
• The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
• The Anchor X and Y allows you to Move the image’s center point.

---

An Easier Way to Flip a Clip in Final Cut Pro Alternative

If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.

Features:

• Allow removing the background noise
• Editing videos and export in multiple formats
• Changing the background and adding the special effects to it
• Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.

Step 2: Flipping the whole video:

When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.

• Flipping only a single part of the video:

Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.

• Exporting the flip video:

After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.

Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.

---

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

---

How to Flip a Clip in Final Cut Pro

As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.

• The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
• The Rotation point allows you to rotate the image around its anchor points.
• The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
• The Anchor X and Y allows you to Move the image’s center point.

---

An Easier Way to Flip a Clip in Final Cut Pro Alternative

If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.

Features:

• Allow removing the background noise
• Editing videos and export in multiple formats
• Changing the background and adding the special effects to it
• Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.

Step 2: Flipping the whole video:

When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.

• Flipping only a single part of the video:

Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.

• Exporting the flip video:

After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.

Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Unlock the Power of Stop Motion on Instagram: Tips, Tricks, and Best Practices

How to Make a Stop Motion Video on Instagram

Liza Brown

Mar 27, 2024• Proven solutions

Instagram’s announcement that the stop motion feature will become available in the Stories section created quite a buzz on the Internet, a while ago. In 2020, the feature remains relatively unknown to social media users, even though on paper it seemed promising.

Stop motion videos, are simply sequentially taken photos that create an illusion of movement once they are played one after the other. These types of videos are growing more popular on social media, as they can make Instagram stories or any other social media feed more interesting. You are at the right place if you would like to join video content creators who already produce stop motion videos because in this article we are going to show you how to make a stop motion video on Instagram.

Part 1: How to Make a Stop Motion Video on Instagram?

The technical side of making a stop motion video on Instagram is rather simple since you can enable this feature in just a few taps. After you launch the app, you should tap on the Camera icon in the upper left corner of the screen. The new window will open where you can choose the type of Instagram story you want to create, so you can pick to go live , record a video normally or use the app’s Boomerang feature.

You will find the Stop Motion option at the end of this menu, and after you tap on it you just have to press the white button in the middle of the toolbar that is located near the bottom of the screen in order to start taking pictures.

Currently, Instagram limits the number of photos you can take with the stop motion feature to ten. Tap on the Done button that is located at the top of the screen once you completed the process of making a stop motion video and then proceed to choose stickers you would like to include in the story you created. Press the Send To button and decide if you want to share the stop motion video to your Instagram or Facebook story or with some of your Instagram followers. ;

Check the ultimate guide about how to use Instagram Stories

Cons of Making Stop Motion Videos with Instagram

Even though Instagram’s new stop motion feature offers an easy way to make your stories more interesting, it still has a few downsides. Adding sound or music to stop motion videos you create with Instagram isn’t possible at the moment, and you can’t do much more other than downloading the video to your device.

Like all other Instagram stories, stop motion videos created with this app are only available for 24 hours if you don’t save them on your phone. Moreover, downloading the stories you create with Instagram ’s stop motion tool will enable you to edit them with video editing apps for iPhone and Android devices and post them to any social media platform you choose.

In addition, the maximum number of frames a stop motion video created with Instagram can have is limited to just ten.

Frequently Asked Questions: Why Can’t I See the Stop Motion Feature in Instagram Stories?

Instagram’s stop motion feature is still in its beta stage, which means that it isn’t available on all versions of the app. So, if you can’t see this option you must go to Google Play or Apps Store and install the version of Instagram that has this feature. If the issue persists, you should opt for some other stop motion app you can use free of charge. ;

Part 2: 3 Best Stop Motion Apps you can Use to Create Animated Videos for Instagram

You shouldn’t worry if the stop motion feature isn’t available on the version of Instagram you’re using, because there are so many apps that are equipped with this tool. With so many different options on the market, finding the app that provides you with all features you need to create stop motion videos can be a difficult task. That’s why we shortlisted the three best apps for iPhones and Android devices that enable you to make animated stop motion videos for Instagram.

1. Over

Price: Free, offers in-app purchase

Compatibility: iOS, Android

Over allows you to do much more than just create stop motion videos you can post on Instagram since it is equipped with a versatile set of tools that can help you improve the brand awareness on social media. There are more than 700 templates to choose from and each of them enables you to adjust your photos and videos to the social network’s demands. However, the free version of the app offers only limited capabilities, and you must upgrade to the Pro version if you want to have access to all photo and video editing tools Over have to offer.

2. Mojo

Price: Free, offers in-app purchases

Compatibility: iOS , Android

Creating content for social media with Mojo is a simple process that can be completed in just three easy steps. You don’t even need a Mojo account to start creating stories with this app. All you have to do is select an animated template, import videos or photos and edit it before tapping on the share button. There are more than a hundred animated templates to choose from, so after you pick one, you just have to add text overlays , but you must purchase Mojo Pro if you want to change aspect ratios , duplicate stories or have access to all text styles and templates.

3. Life Lapse

Price: Free, offers in-app purchases

Compatibility: iOS , Android

The fact that more than a million video content creators and brands are using Life Lapse to make stop motion videos says a lot about the app’s capabilities. Unlike Over and Mojo, Life Lapse lets you set the exposure and focus locks, switch on a grid or use the ghosted image overlay. Besides capturing photos and videos, the app also allows you to import photos you want to include in the stop motion animation. Furthermore, even the free version of Life Lapse offers a variety of video editing tools that allow you to crop images or adjust saturation, brightness or white balance values in each frame.

Check more video editing apps for Instagram

Part 3: How to Create a Stop Motion Videos with Life Lapse

You don’t have to be a skilled cinematographer to make a stop motion video using the Life Lapse app. Once you’ve installed and launched Life Lapse you should create a new project by tapping on the + icon. As soon as the camera loads you’ll be asked to choose if you would like to create a photo or a video project. Tap on the photo option and start taking photos of the objects or people you want to include in your stop motion video.

The app also grants you access to a broad range of tools that will make composing the shots easier or reduce the flickering effect. Even though Life Lapse doesn’t limit the maximum duration of the stop motion videos you can create with it, an Instagram story cannot be longer than 15 seconds. Furthermore, changing a video’s aspect ratio to 9:16 is recommended, as it will enable you to know exactly how your stop motion video is going to look like after you upload it to Instagram.

Part 4: Tips for Creating Stop Motion Videos for Instagram

The process of making a stop motion animation is not technically complicated since you just need to place your phone on a tripod and take a photo each time you move an object in the shot. Even so, working on a stop motion project requires previous preparations. Here are a few tips that will help you make a better stop motion animation video.

1. Develop a concept

What is your stop motion video about? This is the first and the most important question you will have to answer before you start making a stop motion video. Developing a concept will enable you to know which props you are going to need or how many actors you have to find before you can actually start shooting. Stop motion videos can be virtually about anything, and you should choose a story that will keep the audience interested from start to finish.

2. Shoot in studio conditions

Although it is not impossible to make a stop motion video in outdoor conditions, having control over sudden light changes is. That is why it is much better to shoot stop motion videos in studio-like conditions where you can easily adjust all the parameters in accordance with the demands of the project you’re working on. In addition, it is paramount to keep your phone perfectly steady, which is why it is better to mount it on a tripod than to shoot handheld.

Conclusion

Instagram’s stop motion feature is still under development and it may be some time before you can use it to create professional-looking videos. Apps like Over or Life Lapse are a much better option for all video content creators who would like to impress their audience with stop motion videos. Which app are you using to create stop motion videos? Leave a comment and let us know.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Instagram’s announcement that the stop motion feature will become available in the Stories section created quite a buzz on the Internet, a while ago. In 2020, the feature remains relatively unknown to social media users, even though on paper it seemed promising.

Stop motion videos, are simply sequentially taken photos that create an illusion of movement once they are played one after the other. These types of videos are growing more popular on social media, as they can make Instagram stories or any other social media feed more interesting. You are at the right place if you would like to join video content creators who already produce stop motion videos because in this article we are going to show you how to make a stop motion video on Instagram.

Part 1: How to Make a Stop Motion Video on Instagram?

The technical side of making a stop motion video on Instagram is rather simple since you can enable this feature in just a few taps. After you launch the app, you should tap on the Camera icon in the upper left corner of the screen. The new window will open where you can choose the type of Instagram story you want to create, so you can pick to go live , record a video normally or use the app’s Boomerang feature.

You will find the Stop Motion option at the end of this menu, and after you tap on it you just have to press the white button in the middle of the toolbar that is located near the bottom of the screen in order to start taking pictures.

Currently, Instagram limits the number of photos you can take with the stop motion feature to ten. Tap on the Done button that is located at the top of the screen once you completed the process of making a stop motion video and then proceed to choose stickers you would like to include in the story you created. Press the Send To button and decide if you want to share the stop motion video to your Instagram or Facebook story or with some of your Instagram followers. ;

Check the ultimate guide about how to use Instagram Stories

Cons of Making Stop Motion Videos with Instagram

Even though Instagram’s new stop motion feature offers an easy way to make your stories more interesting, it still has a few downsides. Adding sound or music to stop motion videos you create with Instagram isn’t possible at the moment, and you can’t do much more other than downloading the video to your device.

Like all other Instagram stories, stop motion videos created with this app are only available for 24 hours if you don’t save them on your phone. Moreover, downloading the stories you create with Instagram ’s stop motion tool will enable you to edit them with video editing apps for iPhone and Android devices and post them to any social media platform you choose.

In addition, the maximum number of frames a stop motion video created with Instagram can have is limited to just ten.

Frequently Asked Questions: Why Can’t I See the Stop Motion Feature in Instagram Stories?

Instagram’s stop motion feature is still in its beta stage, which means that it isn’t available on all versions of the app. So, if you can’t see this option you must go to Google Play or Apps Store and install the version of Instagram that has this feature. If the issue persists, you should opt for some other stop motion app you can use free of charge. ;

Part 2: 3 Best Stop Motion Apps you can Use to Create Animated Videos for Instagram

You shouldn’t worry if the stop motion feature isn’t available on the version of Instagram you’re using, because there are so many apps that are equipped with this tool. With so many different options on the market, finding the app that provides you with all features you need to create stop motion videos can be a difficult task. That’s why we shortlisted the three best apps for iPhones and Android devices that enable you to make animated stop motion videos for Instagram.

1. Over

Price: Free, offers in-app purchase

Compatibility: iOS, Android

Over allows you to do much more than just create stop motion videos you can post on Instagram since it is equipped with a versatile set of tools that can help you improve the brand awareness on social media. There are more than 700 templates to choose from and each of them enables you to adjust your photos and videos to the social network’s demands. However, the free version of the app offers only limited capabilities, and you must upgrade to the Pro version if you want to have access to all photo and video editing tools Over have to offer.

2. Mojo

Price: Free, offers in-app purchases

Compatibility: iOS , Android

Creating content for social media with Mojo is a simple process that can be completed in just three easy steps. You don’t even need a Mojo account to start creating stories with this app. All you have to do is select an animated template, import videos or photos and edit it before tapping on the share button. There are more than a hundred animated templates to choose from, so after you pick one, you just have to add text overlays , but you must purchase Mojo Pro if you want to change aspect ratios , duplicate stories or have access to all text styles and templates.

3. Life Lapse

Price: Free, offers in-app purchases

Compatibility: iOS , Android

The fact that more than a million video content creators and brands are using Life Lapse to make stop motion videos says a lot about the app’s capabilities. Unlike Over and Mojo, Life Lapse lets you set the exposure and focus locks, switch on a grid or use the ghosted image overlay. Besides capturing photos and videos, the app also allows you to import photos you want to include in the stop motion animation. Furthermore, even the free version of Life Lapse offers a variety of video editing tools that allow you to crop images or adjust saturation, brightness or white balance values in each frame.

Check more video editing apps for Instagram

Part 3: How to Create a Stop Motion Videos with Life Lapse

You don’t have to be a skilled cinematographer to make a stop motion video using the Life Lapse app. Once you’ve installed and launched Life Lapse you should create a new project by tapping on the + icon. As soon as the camera loads you’ll be asked to choose if you would like to create a photo or a video project. Tap on the photo option and start taking photos of the objects or people you want to include in your stop motion video.

The app also grants you access to a broad range of tools that will make composing the shots easier or reduce the flickering effect. Even though Life Lapse doesn’t limit the maximum duration of the stop motion videos you can create with it, an Instagram story cannot be longer than 15 seconds. Furthermore, changing a video’s aspect ratio to 9:16 is recommended, as it will enable you to know exactly how your stop motion video is going to look like after you upload it to Instagram.

Part 4: Tips for Creating Stop Motion Videos for Instagram

The process of making a stop motion animation is not technically complicated since you just need to place your phone on a tripod and take a photo each time you move an object in the shot. Even so, working on a stop motion project requires previous preparations. Here are a few tips that will help you make a better stop motion animation video.

1. Develop a concept

What is your stop motion video about? This is the first and the most important question you will have to answer before you start making a stop motion video. Developing a concept will enable you to know which props you are going to need or how many actors you have to find before you can actually start shooting. Stop motion videos can be virtually about anything, and you should choose a story that will keep the audience interested from start to finish.

2. Shoot in studio conditions

Although it is not impossible to make a stop motion video in outdoor conditions, having control over sudden light changes is. That is why it is much better to shoot stop motion videos in studio-like conditions where you can easily adjust all the parameters in accordance with the demands of the project you’re working on. In addition, it is paramount to keep your phone perfectly steady, which is why it is better to mount it on a tripod than to shoot handheld.

Conclusion

Instagram’s stop motion feature is still under development and it may be some time before you can use it to create professional-looking videos. Apps like Over or Life Lapse are a much better option for all video content creators who would like to impress their audience with stop motion videos. Which app are you using to create stop motion videos? Leave a comment and let us know.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Instagram’s announcement that the stop motion feature will become available in the Stories section created quite a buzz on the Internet, a while ago. In 2020, the feature remains relatively unknown to social media users, even though on paper it seemed promising.

Stop motion videos, are simply sequentially taken photos that create an illusion of movement once they are played one after the other. These types of videos are growing more popular on social media, as they can make Instagram stories or any other social media feed more interesting. You are at the right place if you would like to join video content creators who already produce stop motion videos because in this article we are going to show you how to make a stop motion video on Instagram.

Part 1: How to Make a Stop Motion Video on Instagram?

The technical side of making a stop motion video on Instagram is rather simple since you can enable this feature in just a few taps. After you launch the app, you should tap on the Camera icon in the upper left corner of the screen. The new window will open where you can choose the type of Instagram story you want to create, so you can pick to go live , record a video normally or use the app’s Boomerang feature.

You will find the Stop Motion option at the end of this menu, and after you tap on it you just have to press the white button in the middle of the toolbar that is located near the bottom of the screen in order to start taking pictures.

Currently, Instagram limits the number of photos you can take with the stop motion feature to ten. Tap on the Done button that is located at the top of the screen once you completed the process of making a stop motion video and then proceed to choose stickers you would like to include in the story you created. Press the Send To button and decide if you want to share the stop motion video to your Instagram or Facebook story or with some of your Instagram followers. ;

Check the ultimate guide about how to use Instagram Stories

Cons of Making Stop Motion Videos with Instagram

Even though Instagram’s new stop motion feature offers an easy way to make your stories more interesting, it still has a few downsides. Adding sound or music to stop motion videos you create with Instagram isn’t possible at the moment, and you can’t do much more other than downloading the video to your device.

Like all other Instagram stories, stop motion videos created with this app are only available for 24 hours if you don’t save them on your phone. Moreover, downloading the stories you create with Instagram ’s stop motion tool will enable you to edit them with video editing apps for iPhone and Android devices and post them to any social media platform you choose.

In addition, the maximum number of frames a stop motion video created with Instagram can have is limited to just ten.

Frequently Asked Questions: Why Can’t I See the Stop Motion Feature in Instagram Stories?

Instagram’s stop motion feature is still in its beta stage, which means that it isn’t available on all versions of the app. So, if you can’t see this option you must go to Google Play or Apps Store and install the version of Instagram that has this feature. If the issue persists, you should opt for some other stop motion app you can use free of charge. ;

Part 2: 3 Best Stop Motion Apps you can Use to Create Animated Videos for Instagram

You shouldn’t worry if the stop motion feature isn’t available on the version of Instagram you’re using, because there are so many apps that are equipped with this tool. With so many different options on the market, finding the app that provides you with all features you need to create stop motion videos can be a difficult task. That’s why we shortlisted the three best apps for iPhones and Android devices that enable you to make animated stop motion videos for Instagram.

1. Over

Price: Free, offers in-app purchase

Compatibility: iOS, Android

Over allows you to do much more than just create stop motion videos you can post on Instagram since it is equipped with a versatile set of tools that can help you improve the brand awareness on social media. There are more than 700 templates to choose from and each of them enables you to adjust your photos and videos to the social network’s demands. However, the free version of the app offers only limited capabilities, and you must upgrade to the Pro version if you want to have access to all photo and video editing tools Over have to offer.

2. Mojo

Price: Free, offers in-app purchases

Compatibility: iOS , Android

Creating content for social media with Mojo is a simple process that can be completed in just three easy steps. You don’t even need a Mojo account to start creating stories with this app. All you have to do is select an animated template, import videos or photos and edit it before tapping on the share button. There are more than a hundred animated templates to choose from, so after you pick one, you just have to add text overlays , but you must purchase Mojo Pro if you want to change aspect ratios , duplicate stories or have access to all text styles and templates.

3. Life Lapse

Price: Free, offers in-app purchases

Compatibility: iOS , Android

The fact that more than a million video content creators and brands are using Life Lapse to make stop motion videos says a lot about the app’s capabilities. Unlike Over and Mojo, Life Lapse lets you set the exposure and focus locks, switch on a grid or use the ghosted image overlay. Besides capturing photos and videos, the app also allows you to import photos you want to include in the stop motion animation. Furthermore, even the free version of Life Lapse offers a variety of video editing tools that allow you to crop images or adjust saturation, brightness or white balance values in each frame.

Check more video editing apps for Instagram

Part 3: How to Create a Stop Motion Videos with Life Lapse

You don’t have to be a skilled cinematographer to make a stop motion video using the Life Lapse app. Once you’ve installed and launched Life Lapse you should create a new project by tapping on the + icon. As soon as the camera loads you’ll be asked to choose if you would like to create a photo or a video project. Tap on the photo option and start taking photos of the objects or people you want to include in your stop motion video.

The app also grants you access to a broad range of tools that will make composing the shots easier or reduce the flickering effect. Even though Life Lapse doesn’t limit the maximum duration of the stop motion videos you can create with it, an Instagram story cannot be longer than 15 seconds. Furthermore, changing a video’s aspect ratio to 9:16 is recommended, as it will enable you to know exactly how your stop motion video is going to look like after you upload it to Instagram.

Part 4: Tips for Creating Stop Motion Videos for Instagram

The process of making a stop motion animation is not technically complicated since you just need to place your phone on a tripod and take a photo each time you move an object in the shot. Even so, working on a stop motion project requires previous preparations. Here are a few tips that will help you make a better stop motion animation video.

1. Develop a concept

What is your stop motion video about? This is the first and the most important question you will have to answer before you start making a stop motion video. Developing a concept will enable you to know which props you are going to need or how many actors you have to find before you can actually start shooting. Stop motion videos can be virtually about anything, and you should choose a story that will keep the audience interested from start to finish.

2. Shoot in studio conditions

Although it is not impossible to make a stop motion video in outdoor conditions, having control over sudden light changes is. That is why it is much better to shoot stop motion videos in studio-like conditions where you can easily adjust all the parameters in accordance with the demands of the project you’re working on. In addition, it is paramount to keep your phone perfectly steady, which is why it is better to mount it on a tripod than to shoot handheld.

Conclusion

Instagram’s stop motion feature is still under development and it may be some time before you can use it to create professional-looking videos. Apps like Over or Life Lapse are a much better option for all video content creators who would like to impress their audience with stop motion videos. Which app are you using to create stop motion videos? Leave a comment and let us know.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Instagram’s announcement that the stop motion feature will become available in the Stories section created quite a buzz on the Internet, a while ago. In 2020, the feature remains relatively unknown to social media users, even though on paper it seemed promising.

Stop motion videos, are simply sequentially taken photos that create an illusion of movement once they are played one after the other. These types of videos are growing more popular on social media, as they can make Instagram stories or any other social media feed more interesting. You are at the right place if you would like to join video content creators who already produce stop motion videos because in this article we are going to show you how to make a stop motion video on Instagram.

Part 1: How to Make a Stop Motion Video on Instagram?

The technical side of making a stop motion video on Instagram is rather simple since you can enable this feature in just a few taps. After you launch the app, you should tap on the Camera icon in the upper left corner of the screen. The new window will open where you can choose the type of Instagram story you want to create, so you can pick to go live , record a video normally or use the app’s Boomerang feature.

You will find the Stop Motion option at the end of this menu, and after you tap on it you just have to press the white button in the middle of the toolbar that is located near the bottom of the screen in order to start taking pictures.

Currently, Instagram limits the number of photos you can take with the stop motion feature to ten. Tap on the Done button that is located at the top of the screen once you completed the process of making a stop motion video and then proceed to choose stickers you would like to include in the story you created. Press the Send To button and decide if you want to share the stop motion video to your Instagram or Facebook story or with some of your Instagram followers. ;

Check the ultimate guide about how to use Instagram Stories

Cons of Making Stop Motion Videos with Instagram

Even though Instagram’s new stop motion feature offers an easy way to make your stories more interesting, it still has a few downsides. Adding sound or music to stop motion videos you create with Instagram isn’t possible at the moment, and you can’t do much more other than downloading the video to your device.

Like all other Instagram stories, stop motion videos created with this app are only available for 24 hours if you don’t save them on your phone. Moreover, downloading the stories you create with Instagram ’s stop motion tool will enable you to edit them with video editing apps for iPhone and Android devices and post them to any social media platform you choose.

In addition, the maximum number of frames a stop motion video created with Instagram can have is limited to just ten.

Frequently Asked Questions: Why Can’t I See the Stop Motion Feature in Instagram Stories?

Instagram’s stop motion feature is still in its beta stage, which means that it isn’t available on all versions of the app. So, if you can’t see this option you must go to Google Play or Apps Store and install the version of Instagram that has this feature. If the issue persists, you should opt for some other stop motion app you can use free of charge. ;

Part 2: 3 Best Stop Motion Apps you can Use to Create Animated Videos for Instagram

You shouldn’t worry if the stop motion feature isn’t available on the version of Instagram you’re using, because there are so many apps that are equipped with this tool. With so many different options on the market, finding the app that provides you with all features you need to create stop motion videos can be a difficult task. That’s why we shortlisted the three best apps for iPhones and Android devices that enable you to make animated stop motion videos for Instagram.

1. Over

Price: Free, offers in-app purchase

Compatibility: iOS, Android

Over allows you to do much more than just create stop motion videos you can post on Instagram since it is equipped with a versatile set of tools that can help you improve the brand awareness on social media. There are more than 700 templates to choose from and each of them enables you to adjust your photos and videos to the social network’s demands. However, the free version of the app offers only limited capabilities, and you must upgrade to the Pro version if you want to have access to all photo and video editing tools Over have to offer.

2. Mojo

Price: Free, offers in-app purchases

Compatibility: iOS , Android

Creating content for social media with Mojo is a simple process that can be completed in just three easy steps. You don’t even need a Mojo account to start creating stories with this app. All you have to do is select an animated template, import videos or photos and edit it before tapping on the share button. There are more than a hundred animated templates to choose from, so after you pick one, you just have to add text overlays , but you must purchase Mojo Pro if you want to change aspect ratios , duplicate stories or have access to all text styles and templates.

3. Life Lapse

Price: Free, offers in-app purchases

Compatibility: iOS , Android

The fact that more than a million video content creators and brands are using Life Lapse to make stop motion videos says a lot about the app’s capabilities. Unlike Over and Mojo, Life Lapse lets you set the exposure and focus locks, switch on a grid or use the ghosted image overlay. Besides capturing photos and videos, the app also allows you to import photos you want to include in the stop motion animation. Furthermore, even the free version of Life Lapse offers a variety of video editing tools that allow you to crop images or adjust saturation, brightness or white balance values in each frame.

Check more video editing apps for Instagram

Part 3: How to Create a Stop Motion Videos with Life Lapse

You don’t have to be a skilled cinematographer to make a stop motion video using the Life Lapse app. Once you’ve installed and launched Life Lapse you should create a new project by tapping on the + icon. As soon as the camera loads you’ll be asked to choose if you would like to create a photo or a video project. Tap on the photo option and start taking photos of the objects or people you want to include in your stop motion video.

The app also grants you access to a broad range of tools that will make composing the shots easier or reduce the flickering effect. Even though Life Lapse doesn’t limit the maximum duration of the stop motion videos you can create with it, an Instagram story cannot be longer than 15 seconds. Furthermore, changing a video’s aspect ratio to 9:16 is recommended, as it will enable you to know exactly how your stop motion video is going to look like after you upload it to Instagram.

Part 4: Tips for Creating Stop Motion Videos for Instagram

The process of making a stop motion animation is not technically complicated since you just need to place your phone on a tripod and take a photo each time you move an object in the shot. Even so, working on a stop motion project requires previous preparations. Here are a few tips that will help you make a better stop motion animation video.

1. Develop a concept

What is your stop motion video about? This is the first and the most important question you will have to answer before you start making a stop motion video. Developing a concept will enable you to know which props you are going to need or how many actors you have to find before you can actually start shooting. Stop motion videos can be virtually about anything, and you should choose a story that will keep the audience interested from start to finish.

2. Shoot in studio conditions

Although it is not impossible to make a stop motion video in outdoor conditions, having control over sudden light changes is. That is why it is much better to shoot stop motion videos in studio-like conditions where you can easily adjust all the parameters in accordance with the demands of the project you’re working on. In addition, it is paramount to keep your phone perfectly steady, which is why it is better to mount it on a tripod than to shoot handheld.

Conclusion

Instagram’s stop motion feature is still under development and it may be some time before you can use it to create professional-looking videos. Apps like Over or Life Lapse are a much better option for all video content creators who would like to impress their audience with stop motion videos. Which app are you using to create stop motion videos? Leave a comment and let us know.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Free Video Repeaters: Top Picks for You

Video loops are common online. Most of them may be found on Twitter, YouTube, Facebook, Instagram, and other social media platforms. This may be an excellent way to emphasize a point or make the information more enjoyable.

In addition, it’s a great idea to play the video in repeat mode when you find a certain piece of a video or an entire clip very intriguing and want to watch it again and again for yourself, your friends, or your intended audience on your social media account.

The loopers come in here because they help make the movie loop several times. In this article, we will share a list of free Video Looper online solutions that, according to their regulations, enable you to repeat a piece of video.

In this article

01 Best Video Loopers to Loop Videos for Free on Windows and Mac

02 Create Boomerang Loop withWondershare Filmora Video Editor

Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac

Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.

1. Window Media Player

Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.

Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.

How to Loop Video in Windows Media Player?

Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.

Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.

(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).

Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.

Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.

2. QuickTime Player

QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.

You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.

It can also play your video on loop. Here’s how:

How to Loop Video with QuickTime Player?

If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:

Step 1: Launch the QuickTime player to watch any video.

Step 2: In the taskbar at the top right of the screen, select View.

Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.

These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.

3. VLC Media Player

The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.

This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.

How to Loop a part of the Video in VLC Media Player Continuously?

Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:

Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.

Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.

Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.

4. iMovie

iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.

How to Loop Video in iMovie?

Step 1: Open iMovie and then the video clip you want to loop in.

Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.

5. Windows Photos App

Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.

You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.

How to Loop Video in Windows 10 Photos app?

Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.

Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.

Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.

Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor

Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.

You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:

Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.

Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.

Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.

Summary

Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.

02 Create Boomerang Loop withWondershare Filmora Video Editor

Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac

Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.

1. Window Media Player

Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.

Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.

How to Loop Video in Windows Media Player?

Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.

Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.

(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).

Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.

Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.

2. QuickTime Player

QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.

You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.

It can also play your video on loop. Here’s how:

How to Loop Video with QuickTime Player?

If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:

Step 1: Launch the QuickTime player to watch any video.

Step 2: In the taskbar at the top right of the screen, select View.

Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.

These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.

3. VLC Media Player

The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.

This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.

How to Loop a part of the Video in VLC Media Player Continuously?

Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:

Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.

Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.

Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.

4. iMovie

iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.

How to Loop Video in iMovie?

Step 1: Open iMovie and then the video clip you want to loop in.

Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.

5. Windows Photos App

Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.

You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.

How to Loop Video in Windows 10 Photos app?

Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.

Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.

Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.

Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor

Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.

You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:

Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.

Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.

Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.

Summary

Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.

02 Create Boomerang Loop withWondershare Filmora Video Editor

Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac

Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.

1. Window Media Player

Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.

Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.

How to Loop Video in Windows Media Player?

Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.

Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.

(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).

Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.

Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.

2. QuickTime Player

QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.

You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.

It can also play your video on loop. Here’s how:

How to Loop Video with QuickTime Player?

If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:

Step 1: Launch the QuickTime player to watch any video.

Step 2: In the taskbar at the top right of the screen, select View.

Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.

These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.

3. VLC Media Player

The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.

This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.

How to Loop a part of the Video in VLC Media Player Continuously?

Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:

Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.

Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.

Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.

4. iMovie

iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.

How to Loop Video in iMovie?

Step 1: Open iMovie and then the video clip you want to loop in.

Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.

5. Windows Photos App

Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.

You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.

How to Loop Video in Windows 10 Photos app?

Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.

Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.

Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.

Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor

Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.

You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:

Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.

Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.

Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.

Summary

Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.

02 Create Boomerang Loop withWondershare Filmora Video Editor

Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac

Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.

1. Window Media Player

Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.

Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.

How to Loop Video in Windows Media Player?

Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.

Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.

(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).

Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.

Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.

2. QuickTime Player

QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.

You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.

It can also play your video on loop. Here’s how:

How to Loop Video with QuickTime Player?

If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:

Step 1: Launch the QuickTime player to watch any video.

Step 2: In the taskbar at the top right of the screen, select View.

Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.

These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.

3. VLC Media Player

The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.

This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.

How to Loop a part of the Video in VLC Media Player Continuously?

Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:

Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.

Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.

Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.

4. iMovie

iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.

How to Loop Video in iMovie?

Step 1: Open iMovie and then the video clip you want to loop in.

Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.

5. Windows Photos App

Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.

You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.

How to Loop Video in Windows 10 Photos app?

Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.

Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.

Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.

Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor

Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.

You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:

Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.

Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.

Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.

Summary

Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.

Also read: