New 2024 Approved Flipping Out A Step-by-Step Guide to Rotating Clips in Final Cut Pro
Flipping Out: A Step-by-Step Guide to Rotating Clips in Final Cut Pro
4 Detailed Steps to Flip a Clip in Final Cut Pro
Benjamin Arango
Mar 27, 2024• Proven solutions
The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.
The video below shows how simple it is to flip video in Final Cut Pro.
If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.
How to Flip a Clip in Final Cut Pro
As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.
Step 1: Select a Clip on the Timeline
The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.
Step 2: Access the Transform Option
There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.
Step 3: Rotate and Re-size Video Clips
You can now do the following steps to rotate the video clip and change the size as well:
There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.
Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.
The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.
Step 4: Flipping video clips
Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.
- The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
- The Rotation point allows you to rotate the image around its anchor points.
- The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
- The Anchor X and Y allows you to Move the image’s center point.
An Easier Way to Flip a Clip in Final Cut Pro Alternative
If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.
Features:
- Allow removing the background noise
- Editing videos and export in multiple formats
- Changing the background and adding the special effects to it
- Adjusting the white balance in the clips
Flipping the clips more easily in Wondershare Filmora:
Step1: Importing the original video clip:
After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.
Step 2: Flipping the whole video:
When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.
- Flipping only a single part of the video:
Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.
- Exporting the flip video:
After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.
Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.
In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.
The video below shows how simple it is to flip video in Final Cut Pro.
If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.
How to Flip a Clip in Final Cut Pro
As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.
Step 1: Select a Clip on the Timeline
The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.
Step 2: Access the Transform Option
There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.
Step 3: Rotate and Re-size Video Clips
You can now do the following steps to rotate the video clip and change the size as well:
There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.
Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.
The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.
Step 4: Flipping video clips
Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.
- The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
- The Rotation point allows you to rotate the image around its anchor points.
- The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
- The Anchor X and Y allows you to Move the image’s center point.
An Easier Way to Flip a Clip in Final Cut Pro Alternative
If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.
Features:
- Allow removing the background noise
- Editing videos and export in multiple formats
- Changing the background and adding the special effects to it
- Adjusting the white balance in the clips
Flipping the clips more easily in Wondershare Filmora:
Step1: Importing the original video clip:
After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.
Step 2: Flipping the whole video:
When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.
- Flipping only a single part of the video:
Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.
- Exporting the flip video:
After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.
Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.
In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.
The video below shows how simple it is to flip video in Final Cut Pro.
If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.
How to Flip a Clip in Final Cut Pro
As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.
Step 1: Select a Clip on the Timeline
The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.
Step 2: Access the Transform Option
There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.
Step 3: Rotate and Re-size Video Clips
You can now do the following steps to rotate the video clip and change the size as well:
There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.
Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.
The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.
Step 4: Flipping video clips
Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.
- The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
- The Rotation point allows you to rotate the image around its anchor points.
- The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
- The Anchor X and Y allows you to Move the image’s center point.
An Easier Way to Flip a Clip in Final Cut Pro Alternative
If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.
Features:
- Allow removing the background noise
- Editing videos and export in multiple formats
- Changing the background and adding the special effects to it
- Adjusting the white balance in the clips
Flipping the clips more easily in Wondershare Filmora:
Step1: Importing the original video clip:
After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.
Step 2: Flipping the whole video:
When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.
- Flipping only a single part of the video:
Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.
- Exporting the flip video:
After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.
Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.
In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.
The video below shows how simple it is to flip video in Final Cut Pro.
If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.
How to Flip a Clip in Final Cut Pro
As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.
Step 1: Select a Clip on the Timeline
The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.
Step 2: Access the Transform Option
There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.
Step 3: Rotate and Re-size Video Clips
You can now do the following steps to rotate the video clip and change the size as well:
There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.
Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.
The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.
Step 4: Flipping video clips
Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.
- The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
- The Rotation point allows you to rotate the image around its anchor points.
- The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
- The Anchor X and Y allows you to Move the image’s center point.
An Easier Way to Flip a Clip in Final Cut Pro Alternative
If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.
Features:
- Allow removing the background noise
- Editing videos and export in multiple formats
- Changing the background and adding the special effects to it
- Adjusting the white balance in the clips
Flipping the clips more easily in Wondershare Filmora:
Step1: Importing the original video clip:
After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.
Step 2: Flipping the whole video:
When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.
- Flipping only a single part of the video:
Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.
- Exporting the flip video:
After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.
Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.
In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Unlock Cinematic Storytelling: Using Ken Burns Effect in Final Cut Pro
How to Use Ken Burns Effect in Final Cut Pro with Detailed Steps
Benjamin Arango
Mar 27, 2024• Proven solutions
Those new to the Final Cut Pro or Pro X programs will be finding it a little challenging to add effects or edit videos. It’s a complex film editing software that takes a while to use. With our help, however, we can have you mastering the Ken Burns effect in Final Cut Pro. Do you want to know how to make ken burns effect in final cut pro? Listen closely.
- Part 1: How to Make Ken Burns Effect Final Cut Pro
- Part 2: How to Zoom in Final Cut Pro Using Keyframing
Part 1: How to Make Ken Burns Effect Final Cut Pro
To make a Ken Burns Effect, Final Cut Pro X (or a Ken Burns Effect on Final Cut, since they are both extensions of one another) simply follow our guide.
First, let’s talk about what Ken Burns is and why he has an effect named after him in Final Cut programs!
What is the Ken Burns Effect
Ken Burns is a world-famous American documentary filmmaker. He is well known for producing documentaries that take a candid if somewhat old-world-feeling look into different worlds. He has covered Baseball, the Civil War, and other fascinating times and places. Arguably, he is best known for using archival footage as film footage. How does he do this? By using the Ken Burns Effect, of course.
The Ken Burns Effect in Final Cut Pro X allows the editor to zoom in and out, slow pan, and scroll across archive photography and still film. This will enable you to substitute whole parts of the program you are making with photographs if you haven’t taken enough footage. It is commonly used in editing, particularly when making things like wedding videos , which often feature lots of photos of the happy couple.
Anyway, let’s look at how you implement the Ken Burns Effect in Final Cut Pro.
Steps to Making the Ken Burns Effect Final Cut Pro
Now that we know what is Ken Burns Effect. Let’s go over the steps to making the Ken Burns Effect in Final Cut Pro.
Step 1 – Import your video. From your timeline workspace, select the clip, or highlight the section of the clip, that you want to apply the Ken Burns Effect to.
Step 2 – Enter into the viewer mode to do this. From here, select the pop-up menu from the list of options at the bottom of the screen.
Step 3 – Hold down both the shift key and the letter C. This is the fast way to cut out what you need. You can always stick to the right-click to cut a clip if you are more comfortable with this.
Step 4 – scroll down until you find the Ken Burns Effect option in the control panel. The effect should now appear on your page, in the area you selected.
Ken Burns Customization
You can also customize the ken burns effects in Final Cut.
Step 1 – To transform from the Ken Burns Effect into customization mode, drag the green box in the viewer.
Step 2 – Adjust the green box’s size, shape, and height until you are happy with where it is placed.
Step 3 – Checking what you have already put in place using the preview option is a good idea at this stage. You can edit mistakes out later, but when you are trying to edit for speed, it is best to get it right the first time around!
Step 4 – Adjust the viewer to accommodate any changes you need to make – don’t click the done button until you are sure. That being said, you can always back-step should you mis-click. You can also just start over with the effect customization if you messed up.
Part 2: How to Zoom in Final Cut Pro Using Keyframing
Now that we know how to open and apply the Ken Burns Effect in Final Cut Pro. Let’s examine how we zoom in Final Cut Pro using keyframing. Keyframing, of course, involves basic animation that allows movement to be added to a still frame. So how do you use the Ken Burns Effect in Final Cut Pro X in conjunction with keyframing? Let’s talk you through it.
You can use keyframing to zoom and pan. We will talk you through how you use it to zoom in, and you should be able to work out the rest from there.
Step 1 – Set the playhead at the start of the chosen clip. This is where you want the zoom effect to start from.
Step 2 – Click to select the effects menu. It should be at the bottom of the screen.
Step 3 – Seek out the scale and position tools. You can use these to size your animation, decide how much of a zoom you like, and how fast it will go.
Step 4 – Follow keyframe > size > position and ensure your clip is covered as you need it. You can always come back to this step a few times if you don’t get it immediately right.
Step 5 – Set the playhead where you want the clip and animation to end. Remember – if you zoom or pan too fast, you might glitch in your footage. Do it on time for the best results.
As a Pro Tip: you will be baled to view all keyframes on your clip if you select show video animation from your timeline.
The Ken Burns Conclusion
The Ken Burns Effect is famous for a reason. It allows you to fill up space if you don’t have footage for certain things. It can be used to depict ancient battles without the use of CGI.
The Ken Burns Effect, Final Cut Pro (X) technique lets filmmakers go to places that they wouldn’t otherwise get to. It is excellent for both glimpsing into the past, and for flashing forward into imagined futures. Best of all, it lets you go there when you aren’t a big-budget Hollywood film producer. We love anything that saves a buck or two while we edit.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Those new to the Final Cut Pro or Pro X programs will be finding it a little challenging to add effects or edit videos. It’s a complex film editing software that takes a while to use. With our help, however, we can have you mastering the Ken Burns effect in Final Cut Pro. Do you want to know how to make ken burns effect in final cut pro? Listen closely.
- Part 1: How to Make Ken Burns Effect Final Cut Pro
- Part 2: How to Zoom in Final Cut Pro Using Keyframing
Part 1: How to Make Ken Burns Effect Final Cut Pro
To make a Ken Burns Effect, Final Cut Pro X (or a Ken Burns Effect on Final Cut, since they are both extensions of one another) simply follow our guide.
First, let’s talk about what Ken Burns is and why he has an effect named after him in Final Cut programs!
What is the Ken Burns Effect
Ken Burns is a world-famous American documentary filmmaker. He is well known for producing documentaries that take a candid if somewhat old-world-feeling look into different worlds. He has covered Baseball, the Civil War, and other fascinating times and places. Arguably, he is best known for using archival footage as film footage. How does he do this? By using the Ken Burns Effect, of course.
The Ken Burns Effect in Final Cut Pro X allows the editor to zoom in and out, slow pan, and scroll across archive photography and still film. This will enable you to substitute whole parts of the program you are making with photographs if you haven’t taken enough footage. It is commonly used in editing, particularly when making things like wedding videos , which often feature lots of photos of the happy couple.
Anyway, let’s look at how you implement the Ken Burns Effect in Final Cut Pro.
Steps to Making the Ken Burns Effect Final Cut Pro
Now that we know what is Ken Burns Effect. Let’s go over the steps to making the Ken Burns Effect in Final Cut Pro.
Step 1 – Import your video. From your timeline workspace, select the clip, or highlight the section of the clip, that you want to apply the Ken Burns Effect to.
Step 2 – Enter into the viewer mode to do this. From here, select the pop-up menu from the list of options at the bottom of the screen.
Step 3 – Hold down both the shift key and the letter C. This is the fast way to cut out what you need. You can always stick to the right-click to cut a clip if you are more comfortable with this.
Step 4 – scroll down until you find the Ken Burns Effect option in the control panel. The effect should now appear on your page, in the area you selected.
Ken Burns Customization
You can also customize the ken burns effects in Final Cut.
Step 1 – To transform from the Ken Burns Effect into customization mode, drag the green box in the viewer.
Step 2 – Adjust the green box’s size, shape, and height until you are happy with where it is placed.
Step 3 – Checking what you have already put in place using the preview option is a good idea at this stage. You can edit mistakes out later, but when you are trying to edit for speed, it is best to get it right the first time around!
Step 4 – Adjust the viewer to accommodate any changes you need to make – don’t click the done button until you are sure. That being said, you can always back-step should you mis-click. You can also just start over with the effect customization if you messed up.
Part 2: How to Zoom in Final Cut Pro Using Keyframing
Now that we know how to open and apply the Ken Burns Effect in Final Cut Pro. Let’s examine how we zoom in Final Cut Pro using keyframing. Keyframing, of course, involves basic animation that allows movement to be added to a still frame. So how do you use the Ken Burns Effect in Final Cut Pro X in conjunction with keyframing? Let’s talk you through it.
You can use keyframing to zoom and pan. We will talk you through how you use it to zoom in, and you should be able to work out the rest from there.
Step 1 – Set the playhead at the start of the chosen clip. This is where you want the zoom effect to start from.
Step 2 – Click to select the effects menu. It should be at the bottom of the screen.
Step 3 – Seek out the scale and position tools. You can use these to size your animation, decide how much of a zoom you like, and how fast it will go.
Step 4 – Follow keyframe > size > position and ensure your clip is covered as you need it. You can always come back to this step a few times if you don’t get it immediately right.
Step 5 – Set the playhead where you want the clip and animation to end. Remember – if you zoom or pan too fast, you might glitch in your footage. Do it on time for the best results.
As a Pro Tip: you will be baled to view all keyframes on your clip if you select show video animation from your timeline.
The Ken Burns Conclusion
The Ken Burns Effect is famous for a reason. It allows you to fill up space if you don’t have footage for certain things. It can be used to depict ancient battles without the use of CGI.
The Ken Burns Effect, Final Cut Pro (X) technique lets filmmakers go to places that they wouldn’t otherwise get to. It is excellent for both glimpsing into the past, and for flashing forward into imagined futures. Best of all, it lets you go there when you aren’t a big-budget Hollywood film producer. We love anything that saves a buck or two while we edit.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Those new to the Final Cut Pro or Pro X programs will be finding it a little challenging to add effects or edit videos. It’s a complex film editing software that takes a while to use. With our help, however, we can have you mastering the Ken Burns effect in Final Cut Pro. Do you want to know how to make ken burns effect in final cut pro? Listen closely.
- Part 1: How to Make Ken Burns Effect Final Cut Pro
- Part 2: How to Zoom in Final Cut Pro Using Keyframing
Part 1: How to Make Ken Burns Effect Final Cut Pro
To make a Ken Burns Effect, Final Cut Pro X (or a Ken Burns Effect on Final Cut, since they are both extensions of one another) simply follow our guide.
First, let’s talk about what Ken Burns is and why he has an effect named after him in Final Cut programs!
What is the Ken Burns Effect
Ken Burns is a world-famous American documentary filmmaker. He is well known for producing documentaries that take a candid if somewhat old-world-feeling look into different worlds. He has covered Baseball, the Civil War, and other fascinating times and places. Arguably, he is best known for using archival footage as film footage. How does he do this? By using the Ken Burns Effect, of course.
The Ken Burns Effect in Final Cut Pro X allows the editor to zoom in and out, slow pan, and scroll across archive photography and still film. This will enable you to substitute whole parts of the program you are making with photographs if you haven’t taken enough footage. It is commonly used in editing, particularly when making things like wedding videos , which often feature lots of photos of the happy couple.
Anyway, let’s look at how you implement the Ken Burns Effect in Final Cut Pro.
Steps to Making the Ken Burns Effect Final Cut Pro
Now that we know what is Ken Burns Effect. Let’s go over the steps to making the Ken Burns Effect in Final Cut Pro.
Step 1 – Import your video. From your timeline workspace, select the clip, or highlight the section of the clip, that you want to apply the Ken Burns Effect to.
Step 2 – Enter into the viewer mode to do this. From here, select the pop-up menu from the list of options at the bottom of the screen.
Step 3 – Hold down both the shift key and the letter C. This is the fast way to cut out what you need. You can always stick to the right-click to cut a clip if you are more comfortable with this.
Step 4 – scroll down until you find the Ken Burns Effect option in the control panel. The effect should now appear on your page, in the area you selected.
Ken Burns Customization
You can also customize the ken burns effects in Final Cut.
Step 1 – To transform from the Ken Burns Effect into customization mode, drag the green box in the viewer.
Step 2 – Adjust the green box’s size, shape, and height until you are happy with where it is placed.
Step 3 – Checking what you have already put in place using the preview option is a good idea at this stage. You can edit mistakes out later, but when you are trying to edit for speed, it is best to get it right the first time around!
Step 4 – Adjust the viewer to accommodate any changes you need to make – don’t click the done button until you are sure. That being said, you can always back-step should you mis-click. You can also just start over with the effect customization if you messed up.
Part 2: How to Zoom in Final Cut Pro Using Keyframing
Now that we know how to open and apply the Ken Burns Effect in Final Cut Pro. Let’s examine how we zoom in Final Cut Pro using keyframing. Keyframing, of course, involves basic animation that allows movement to be added to a still frame. So how do you use the Ken Burns Effect in Final Cut Pro X in conjunction with keyframing? Let’s talk you through it.
You can use keyframing to zoom and pan. We will talk you through how you use it to zoom in, and you should be able to work out the rest from there.
Step 1 – Set the playhead at the start of the chosen clip. This is where you want the zoom effect to start from.
Step 2 – Click to select the effects menu. It should be at the bottom of the screen.
Step 3 – Seek out the scale and position tools. You can use these to size your animation, decide how much of a zoom you like, and how fast it will go.
Step 4 – Follow keyframe > size > position and ensure your clip is covered as you need it. You can always come back to this step a few times if you don’t get it immediately right.
Step 5 – Set the playhead where you want the clip and animation to end. Remember – if you zoom or pan too fast, you might glitch in your footage. Do it on time for the best results.
As a Pro Tip: you will be baled to view all keyframes on your clip if you select show video animation from your timeline.
The Ken Burns Conclusion
The Ken Burns Effect is famous for a reason. It allows you to fill up space if you don’t have footage for certain things. It can be used to depict ancient battles without the use of CGI.
The Ken Burns Effect, Final Cut Pro (X) technique lets filmmakers go to places that they wouldn’t otherwise get to. It is excellent for both glimpsing into the past, and for flashing forward into imagined futures. Best of all, it lets you go there when you aren’t a big-budget Hollywood film producer. We love anything that saves a buck or two while we edit.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Those new to the Final Cut Pro or Pro X programs will be finding it a little challenging to add effects or edit videos. It’s a complex film editing software that takes a while to use. With our help, however, we can have you mastering the Ken Burns effect in Final Cut Pro. Do you want to know how to make ken burns effect in final cut pro? Listen closely.
- Part 1: How to Make Ken Burns Effect Final Cut Pro
- Part 2: How to Zoom in Final Cut Pro Using Keyframing
Part 1: How to Make Ken Burns Effect Final Cut Pro
To make a Ken Burns Effect, Final Cut Pro X (or a Ken Burns Effect on Final Cut, since they are both extensions of one another) simply follow our guide.
First, let’s talk about what Ken Burns is and why he has an effect named after him in Final Cut programs!
What is the Ken Burns Effect
Ken Burns is a world-famous American documentary filmmaker. He is well known for producing documentaries that take a candid if somewhat old-world-feeling look into different worlds. He has covered Baseball, the Civil War, and other fascinating times and places. Arguably, he is best known for using archival footage as film footage. How does he do this? By using the Ken Burns Effect, of course.
The Ken Burns Effect in Final Cut Pro X allows the editor to zoom in and out, slow pan, and scroll across archive photography and still film. This will enable you to substitute whole parts of the program you are making with photographs if you haven’t taken enough footage. It is commonly used in editing, particularly when making things like wedding videos , which often feature lots of photos of the happy couple.
Anyway, let’s look at how you implement the Ken Burns Effect in Final Cut Pro.
Steps to Making the Ken Burns Effect Final Cut Pro
Now that we know what is Ken Burns Effect. Let’s go over the steps to making the Ken Burns Effect in Final Cut Pro.
Step 1 – Import your video. From your timeline workspace, select the clip, or highlight the section of the clip, that you want to apply the Ken Burns Effect to.
Step 2 – Enter into the viewer mode to do this. From here, select the pop-up menu from the list of options at the bottom of the screen.
Step 3 – Hold down both the shift key and the letter C. This is the fast way to cut out what you need. You can always stick to the right-click to cut a clip if you are more comfortable with this.
Step 4 – scroll down until you find the Ken Burns Effect option in the control panel. The effect should now appear on your page, in the area you selected.
Ken Burns Customization
You can also customize the ken burns effects in Final Cut.
Step 1 – To transform from the Ken Burns Effect into customization mode, drag the green box in the viewer.
Step 2 – Adjust the green box’s size, shape, and height until you are happy with where it is placed.
Step 3 – Checking what you have already put in place using the preview option is a good idea at this stage. You can edit mistakes out later, but when you are trying to edit for speed, it is best to get it right the first time around!
Step 4 – Adjust the viewer to accommodate any changes you need to make – don’t click the done button until you are sure. That being said, you can always back-step should you mis-click. You can also just start over with the effect customization if you messed up.
Part 2: How to Zoom in Final Cut Pro Using Keyframing
Now that we know how to open and apply the Ken Burns Effect in Final Cut Pro. Let’s examine how we zoom in Final Cut Pro using keyframing. Keyframing, of course, involves basic animation that allows movement to be added to a still frame. So how do you use the Ken Burns Effect in Final Cut Pro X in conjunction with keyframing? Let’s talk you through it.
You can use keyframing to zoom and pan. We will talk you through how you use it to zoom in, and you should be able to work out the rest from there.
Step 1 – Set the playhead at the start of the chosen clip. This is where you want the zoom effect to start from.
Step 2 – Click to select the effects menu. It should be at the bottom of the screen.
Step 3 – Seek out the scale and position tools. You can use these to size your animation, decide how much of a zoom you like, and how fast it will go.
Step 4 – Follow keyframe > size > position and ensure your clip is covered as you need it. You can always come back to this step a few times if you don’t get it immediately right.
Step 5 – Set the playhead where you want the clip and animation to end. Remember – if you zoom or pan too fast, you might glitch in your footage. Do it on time for the best results.
As a Pro Tip: you will be baled to view all keyframes on your clip if you select show video animation from your timeline.
The Ken Burns Conclusion
The Ken Burns Effect is famous for a reason. It allows you to fill up space if you don’t have footage for certain things. It can be used to depict ancient battles without the use of CGI.
The Ken Burns Effect, Final Cut Pro (X) technique lets filmmakers go to places that they wouldn’t otherwise get to. It is excellent for both glimpsing into the past, and for flashing forward into imagined futures. Best of all, it lets you go there when you aren’t a big-budget Hollywood film producer. We love anything that saves a buck or two while we edit.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Repeat, Repeat, Repeat: Best Free Video Looping Software
Video loops are common online. Most of them may be found on Twitter, YouTube, Facebook, Instagram, and other social media platforms. This may be an excellent way to emphasize a point or make the information more enjoyable.
In addition, it’s a great idea to play the video in repeat mode when you find a certain piece of a video or an entire clip very intriguing and want to watch it again and again for yourself, your friends, or your intended audience on your social media account.
The loopers come in here because they help make the movie loop several times. In this article, we will share a list of free Video Looper online solutions that, according to their regulations, enable you to repeat a piece of video.
In this article
01 Best Video Loopers to Loop Videos for Free on Windows and Mac
02 Create Boomerang Loop withWondershare Filmora Video Editor
Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac
Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.
1. Window Media Player
Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.
Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.
How to Loop Video in Windows Media Player?
Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.
Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.
(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).
Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.
Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.
2. QuickTime Player
QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.
You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.
It can also play your video on loop. Here’s how:
How to Loop Video with QuickTime Player?
If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:
Step 1: Launch the QuickTime player to watch any video.
Step 2: In the taskbar at the top right of the screen, select View.
Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.
These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.
3. VLC Media Player
The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.
This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.
How to Loop a part of the Video in VLC Media Player Continuously?
Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:
Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.
Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.
Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.
4. iMovie
iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.
How to Loop Video in iMovie?
Step 1: Open iMovie and then the video clip you want to loop in.
Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.
5. Windows Photos App
Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.
You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.
How to Loop Video in Windows 10 Photos app?
Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.
Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.
Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.
Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor
Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.
You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:
Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.
Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.
Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.
Summary
Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.
02 Create Boomerang Loop withWondershare Filmora Video Editor
Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac
Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.
1. Window Media Player
Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.
Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.
How to Loop Video in Windows Media Player?
Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.
Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.
(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).
Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.
Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.
2. QuickTime Player
QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.
You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.
It can also play your video on loop. Here’s how:
How to Loop Video with QuickTime Player?
If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:
Step 1: Launch the QuickTime player to watch any video.
Step 2: In the taskbar at the top right of the screen, select View.
Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.
These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.
3. VLC Media Player
The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.
This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.
How to Loop a part of the Video in VLC Media Player Continuously?
Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:
Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.
Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.
Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.
4. iMovie
iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.
How to Loop Video in iMovie?
Step 1: Open iMovie and then the video clip you want to loop in.
Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.
5. Windows Photos App
Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.
You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.
How to Loop Video in Windows 10 Photos app?
Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.
Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.
Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.
Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor
Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.
You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:
Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.
Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.
Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.
Summary
Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.
02 Create Boomerang Loop withWondershare Filmora Video Editor
Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac
Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.
1. Window Media Player
Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.
Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.
How to Loop Video in Windows Media Player?
Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.
Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.
(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).
Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.
Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.
2. QuickTime Player
QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.
You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.
It can also play your video on loop. Here’s how:
How to Loop Video with QuickTime Player?
If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:
Step 1: Launch the QuickTime player to watch any video.
Step 2: In the taskbar at the top right of the screen, select View.
Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.
These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.
3. VLC Media Player
The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.
This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.
How to Loop a part of the Video in VLC Media Player Continuously?
Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:
Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.
Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.
Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.
4. iMovie
iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.
How to Loop Video in iMovie?
Step 1: Open iMovie and then the video clip you want to loop in.
Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.
5. Windows Photos App
Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.
You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.
How to Loop Video in Windows 10 Photos app?
Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.
Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.
Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.
Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor
Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.
You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:
Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.
Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.
Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.
Summary
Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.
02 Create Boomerang Loop withWondershare Filmora Video Editor
Part 1: Best Video Loopers to Loop Videos for Free on Windows and Mac
Whatever you are motivated to create a video loop, you should know that it’s a straightforward process. If you wish to create a looping video, you’ll need to download a video editing tool. Here we will cover the best free video looper for you and how you can create a loop video.
1. Window Media Player
Windows Media Player offers a clean and intuitive interface, outstanding performance, particularly with big media libraries, and solid integration with Urge, the company’s de facto music streaming service. Whenever Windows Media Player approaches the finish of a video, it gives you the option to repeat it manually, but it does not do it routinely.
Enabling the Repeat function, on the other hand, directs Media Player to play the video in a constant loop until you actively stop it or shut the software. Looping a video impacts the rest of the video from start to finish; Media Player does not only allow you to loop a portion of it but more.
How to Loop Video in Windows Media Player?
Step 1: Drag your mouse pointer over the Media Player window in Now Playing status to reveal the playback settings.
Step 2: To continually repeat the movie, click the Turn Repeat On button, denoted by a circular arrow, and glows blue when toggled on.
(Note: If you don’t see this button in a tiny playing window, select the square Maximize symbol or drag the video corners to expand the window bigger).
Step 3: Until you exit the application or click the Turn Repeat Off icon, the Repeat option will repeat the whole video.
Note: When you close the window, your prior feature selection is retained; thus, the next video you watch will play in a loop until you turn off the Repeat feature.
2. QuickTime Player
QuickTime Player is a basic application that allows you to watch videos and record screencasts on your Mac. You may also produce your videos and audio recordings and do rapid changes. Basic activities such as video flipping and clip splitting are included in edits.
You can record a screencast of a lecture, or capture a portion of the screen with QuickTime, which is ideal for creating a video lesson for an application. Using QuickTime, you may cut the length of video clips or merge many pieces into a single film. Drag the clips to a film window - QuickTime dynamically scales or trims them to fit the size of the movie.
It can also play your video on loop. Here’s how:
How to Loop Video with QuickTime Player?
If you’re using a Mac and wish to generate a video loop in QuickTime Player, follow these steps:
Step 1: Launch the QuickTime player to watch any video.
Step 2: In the taskbar at the top right of the screen, select View.
Step 3: From the drop-down option, select Loop. And that’s it. You have put a video on loop.
These two video programs simplify setting up videos to run on repeat; they don’t allow you to loop individual video parts. To do so, you’ll need more powerful software, such as the well-known VLC Media Player.
3. VLC Media Player
The VLC media player is a program that allows you to play video and music files on your computer. The VLC player can operate on several operating systems, including Windows 2021, XP, and Mac OS X, because of the device’s powerful CPUs.
This makes the VLC Media Player an excellent alternative for anybody searching for a media player that can simultaneously run many programs. This free video editing program also includes special capabilities that allow it to execute numerous jobs simultaneously, including video editing, data transmission, graphic display, sound editing, and much more.
How to Loop a part of the Video in VLC Media Player Continuously?
Create a beginning point A and an ending point B, which are in the center of VLC’s timeline. There is a control button for the A to B looping function in the Advanced Controls. The starting and ending positions inside a media file can be specified by bringing up the advanced controls first. Now follow these steps to put a video on loop in the VLC media player:
Step 1: Open the video with VLC media player. Go to View. Select the Advanced Controls option.
Step 2: Go to the bottom of the VLC media player, and you will find 4 controls above the play button. Click the third button Loop from Piont A to Point B continuously to mark the starting point of the loop; and then click the third button again to mark the end of the loop.
Step 3: Click the Play button and you will find the video is playing loop. Until you press the Loop from point A to point B option for the third time to discontinue the looped playback, the segment of the clip you’ve put up will keep on playing on loop.
4. iMovie
iMovie is a fantastic tool for making beautiful short films, music videos, picture slideshows, and other creative projects. You may also loop videos straight in the iMovie software; however, you’ll need to utilize QuickTime to loop movies continually if you want to export them. Here are the quick and easy ways to loop a movie into iMovie.
How to Loop Video in iMovie?
Step 1: Open iMovie and then the video clip you want to loop in.
Step 2: Select the Loop Playback option from the View menu. Once the video begins to play, it will loop indefinitely until you stop it.
5. Windows Photos App
Microsoft Photos, a free photo viewer and editor bundled with Windows 10, provides capable image editing and photo improvements and capabilities for organizing and editing movies, all in a touch-friendly interface.
You may doodle on photographs, apply background music and 3D effects to videos , and use automated object tagging to make searching easier. Microsoft Photos is a wonderful tool for dealing with digital photographs, and for certain users, it may even replace third-party photo applications.
How to Loop Video in Windows 10 Photos app?
Windows 10 comes with the Photos app preinstalled. It can also assist you in making your movie loop. Here’s how to do it.
Step 1: Import your video to the Photos app, and use the trim tool to get the part you want to loop.
Step 2: Copy and paste the trimmed video to the storyboard as many times as you like. And then click the Finish Video button to export the video.
Part 2: Create Boomerang Loop with Wondershare Filmora Video Editor
Looping a movie is not a difficult chore for anyone, even a novice. As we all know, most video players cease playing when a video approaches its climax. You can manually reverse the portion if you wish to see it with Boomerang effects.
You may loop and enjoy the video you like continuously when you do a new project in Wondershare Filmora Video Editor , a video editor for all video content creators.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Furthermore, this multi-functional program may trim, clip, divide or combine films to your liking. To loop any video in Filmora, follow these steps:
Step 1: Launch the Filmora video editor and import the video file. Click on File>Import Media>Import Media Files. And then drag the video file to the timeline. Do some basic editing such as trimming and cutting to get the segments that you want to loop with the Boomerang effect, if necessary.
Step 2: Copy and paste the video file on the timeline, and then change the speed of the pasted video to apply the Reverse effect. Repeat the process to loop the video as many times as you want.
Step 3: Export the video files when you’re done. Click on Export and save the looping video as a video or gif, and then select the location where you want to save the file.
Summary
Depending on your taste, the number of video loops required, and the amount of information you need when creating a full-fledged film with repeats, you can use any software described above. If you need a more advanced option, Wondershare Filmora video editor is your best alternative in terms of Video Loopers. It is not only a free video looper, but it also has several additional capabilities that allow you to create a full output with granular changes.
Accelerate Your Footage: A Step-by-Step Guide to Time Lapse Videos
Time Lapse Software: Create Time Lapse Video
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Also read:
- New Seamless Video Editing The Top 5 Free Online Video Merging Platforms for 2024
- New In 2024, WhatsApp Status Video Creator Tools
- New Discover the Benefits of Using an Mp3 Converter on Windows A Worthwhile Read for 2024
- New 2024 Approved Best Video Editing Programs for GoPro Users Looking Beyond Studio
- Updated The Ultimate List of 3D Video Software You Should Know for 2024
- New 2024 Approved Windows Movie Maker Free Download A Comprehensive Guide
- Updated The Ultimate Guide to Finding a Lightning-Fast YouTube to MP4 Converter for 2024
- 2024 Approved Protect Your Privacy 10 Best Free Face Blurring Apps for Images and Clips
- New In 2024, Best Vegas Pro Replacements for Mac Users Free and Premium Options
- Updated Audio Fade Ins and Outs Made Easy 2 Final Cut Pro Techniques for 2024
- Updated Video to DVD Conversion A Comprehensive Guide for Windows and Mac
- Updated Unmarked and Unbeatable 10 Free Android Video Editors for 2024
- Updated 2024 Approved Sizing Up Your Content How Aspect Ratio Affects YouTube Video Style
- New In 2024, Best Free MOV Video Combining Software for Windows and Mac
- New In 2024, No-Cost Commercial Images The Ultimate Resource List
- Updated Split Your MPEG Videos with Ease 5 Free Tools You Need to Try
- Updated Trim, Cut, and Edit AVI Videos Top Software for Windows, MAC, and Mobile for 2024
- In 2024, Mobile Reaction Video Studios Top iOS and Android Apps
- Updated 2024 Approved Best Websites for Turning a Photo Into a Cartoon
- New In 2024, Compress Videos Without Breaking the Bank 5 Best Free iOS Apps
- Updated In 2024, From Blurry to Brilliant Top Video Enhancement Tools
- In 2024, Watermark-Free Videos How to Remove Filmora Branding with or without Paying
- New In 2024, Extract Sound From Instagram Reels and Videos
- Updated 2024 Approved Video Dimensions for Instagram A Beginners Guide
- Updated 2024 Approved Add a Touch of Pro Best Bokeh Effect Apps for iPhone and Android
- Updated In 2024, Top-Rated Video Editors for Effortless Reframing
- New 2024 Approved Take Your Videos to the Next Level 3D Effects Tutorial for Windows Users
- Updated Unlock Screen Recording Potential Tips and Tricks for Filmora Scrn Users
- Updated Revamp Your Footage Top Free Online Video Quality Improvement Tools for 2024
- In 2024, MP4 Video Information Editors Best Choices
- Updated 2024 Approved Best Intro Creator Software for PC Online and Offline Options
- Updated The Ultimate List of Online WebM Video Compressors
- New In 2024, Mac Movie Magic 8 Essential Video Creation Tools
- The Ultimate List 10 Best Free Online Video Looping Software for 2024
- Updated Top 16 Best Free Movie Makers Easy to Use for 2024
- New In 2024, Cut, Trim, and Share The Top Free Online Video Editing Platforms
- Updated 2024 Approved Final Cut Pro vs LumaFusion A Comprehensive Guide to Choosing the Best Video Editor
- Updated 5 Leading Photo Video Makers for Breathtaking Slideshows for 2024
- Updated In 2024, Discover the Best Glitch Video Editors for Windows, Mac, and Online Use
- New The Best Free iPhone Video Editing Apps for Rotation 2023 Review for 2024
- New Video Editing Tools with Built-In Music Libraries 2024 Edition
- New Free MOV Cutting Tools Simplify Your Video Editing for 2024
- Updated 2024 Approved Free and Legal How to Use Images for Commercial Purposes
- Updated Say Goodbye to Watermarks Best Online TikTok Video Editors for 2024
- New 2024 Approved Online Video Editing Essentials Download, Edit, and Publish Like a Pro
- New 2024 Approved WebM to MP3 Made Easy 10 Reliable Converter Options
- Updated 2024 Approved IDub
- New The Ultimate List 10 Best Video Combining Alternatives for 2024
- In 2024, Top Picks for 4K Proxy Video Editing 8 Essential Apps
- In 2024, 5 Quick Methods to Bypass Lenovo ThinkPhone FRP
- In 2024, 5 Ways to Move Contacts From Honor 90 to iPhone (13/14/15) | Dr.fone
- 5 Best Route Generator Apps You Should Try On Samsung Galaxy A05 | Dr.fone
- Undelete lost data from A70
- How can I get more stardust in pokemon go On Nokia G22? | Dr.fone
- How to Recover Deleted Notes from iPhone 7 Plus? | Stellar
- New In 2024, Unhappy with Sony Vegas? Here Are the Best Windows Alternatives to Consider
- iPogo will be the new iSpoofer On Realme 10T 5G? | Dr.fone
- In 2024, How to Unlock Apple iPhone 14 Passcode without iTunes without Knowing Passcode?
- How to Bypass Android Lock Screen Using Emergency Call On Poco M6 5G?
- Process of Screen Sharing Honor 100 to PC- Detailed Steps | Dr.fone
- Things You Dont Know About Samsung Galaxy F34 5G Reset Code | Dr.fone
- Guide to Mirror Your Infinix Hot 40 to Other Android devices | Dr.fone
- Full Guide to Unlock iPhone 6s with iTunes
- Looking For A Location Changer On Itel P55+? Look No Further | Dr.fone
- In 2024, Top 5 Tracking Apps to Track Realme Note 50 without Them Knowing | Dr.fone
- In 2024, How to Turn Off Find My Apple iPhone 8 when Phone is Broken? | Dr.fone
- Best 3 Samsung Galaxy F14 5G Emulator for Mac to Run Your Wanted Android Apps | Dr.fone
- Getting the Pokemon Go GPS Signal Not Found 11 Error in Xiaomi Redmi Note 13 Pro+ 5G | Dr.fone
- How To Restore Missing Contacts Files from Tecno Pop 8.
- Best 10 Mock Location Apps Worth Trying On Oppo Reno 9A | Dr.fone
- New 2024 Approved How to Make Vintage Film Effect 1950S
- Proven Ways to Fix There Was A Problem Parsing the Package on Tecno Camon 30 Pro 5G | Dr.fone
- Free electronic signature - For .docx
- Is GSM Flasher ADB Legit? Full Review To Bypass Your ZTE Axon 40 Lite Phone FRP Lock
- How to Fix Error 495 While Download/Updating Android Apps On Xiaomi Redmi K70E | Dr.fone
- In 2024, Top 10 Telegram Spy Tools On Samsung Galaxy F54 5G for Parents | Dr.fone
- Why Does My Vivo S17t Keep Turning Off By Itself? 6 Fixes Are Here | Dr.fone
- In 2024, How to Fake Snapchat Location without Jailbreak On Motorola G54 5G | Dr.fone
- 9 Solutions to Fix Process System Isnt Responding Error on Poco F5 5G | Dr.fone
- 9 Mind-Blowing Tricks to Hatch Eggs in Pokemon Go Without Walking On Honor 80 Pro Straight Screen Edition | Dr.fone
- How To Transfer Data From Apple iPhone XS Max To Other iPhone devices? | Dr.fone
- Title: New 2024 Approved Flipping Out A Step-by-Step Guide to Rotating Clips in Final Cut Pro
- Author: Ava
- Created at : 2024-04-29 13:13:48
- Updated at : 2024-04-30 13:13:48
- Link: https://video-content-creator.techidaily.com/new-2024-approved-flipping-out-a-step-by-step-guide-to-rotating-clips-in-final-cut-pro/
- License: This work is licensed under CC BY-NC-SA 4.0.